Overview
G2 Axle and Gear part 20-2028 is a replacement internal gear kit for rear Chrysler 9.25 inch differentials with 31 splines and an open case. It lets you renew damaged or worn gears in a carrier you already have.
It is a direct fit for the Chrysler 9.25 inch axle type, so it suits a rear housing of that size. Check the housing size and spline count before ordering, since fit is set by those two details.
Key features
- Replacement internal gears for a Chrysler 9.25 inch rear axle
- Direct fit for the listed axle type
- 31 spline axle spline count
- Open case for an open differential
- Renews worn gears without a new carrier
Chrysler rear axle service tips
Chrysler rear axles of this size are often rebuilt when the gears show pitting, chipping or uneven contact patterns. Before the carrier comes apart, check the pinion depth and the ring gear runout, and note the shim positions so the new set can be set up with the same baseline. Clean the housing and carrier thoroughly, because small metal particles trapped under a new gear set can cause early failure.
Expect to replace the bearings and seals at the same time. Bearings that have run on a worn gear set carry the same damage, and a new seal prevents oil loss at the pinion. Use the gear oil type your axle calls for, and check the level after the first drives to confirm nothing is leaking.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 20-2028 |
| UPC | 631410093322 |
| Axle type | Chrysler 9.25 Inches |
| Axle location | Rear |
| Axle spline | 31 splines |
| Case type | Open |
Vehicle fitment
Fit is set by the axle type: rear Chrysler 9.25 inch axles with 31 splines and an open case. Other Chrysler axle sizes are not covered by this kit.
Check your rear axle size and spline count against this kit, since a different Chrysler axle size is not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear sets for Chrysler rear axles call for an experienced shop, since gear mesh and backlash must be right before the carrier is closed. Expect a break-in period once the new gears are in use.
What’s included
The kit is the internal gear set, used to replace worn or damaged gears inside a Chrysler 9.25 inch carrier. Check the package contents against your installation before starting.
Not included: The Chrysler carrier, housing and axle shafts are not part of this kit.



