Overview
The G2 Axle and Gear Ford 9 inch internal kit, part number 20-2011B, is a set of replacement internal gears for a Ford 9 Inches rear axle with 31 splines and an open case. It is meant to replace worn or damaged gears without swapping the whole differential carrier.
The axle type is the detail that decides fit, so check the axle in your vehicle before ordering.
Key features
- Replacement internal gears for open differential cases
- 31 spline axle compatibility
- Rear axle location
- Ford 9 Inches axle type
Open differential basics
An open differential sends power to whichever wheel has the least traction, so one spinning tire can take most of the torque. That behavior is normal for the design, and it is the reason many owners later choose a traction add-on. Gear wear shows up as chatter during tight turns, a rough feel when pulling away, or a whine that rises and falls with road speed.
If the vehicle is used off road, the internal gears see sudden shock loads when a wheel lifts and drops. Keeping the gear oil fresh and using the correct fluid for an open case helps protect new gears. Avoid mixing additive types, and change the oil after the break-in run.
- Check gear oil level after the first few drives
- Note any chatter during tight, low-speed turns
- Keep axle breathers clear of mud and water
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 20-2011B |
| UPC | 631410093216 |
| Component | Internal gear kit |
| Axle type | Ford 9 Inches |
| Axle location | Rear |
| Axle spline | 31 splines |
| Case type | Open |
Vehicle fitment
Fitment is by axle type: Ford 9 Inches at the rear. Confirm the axle size and spline count match your housing before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear kits like this are usually assembled by a shop that can check gear contact and preload. Expect a break-in period for the new gears after assembly.
What’s included
The internal gears in the kit are the only components. Check the package contents against your installation before starting.






