Overview
The G2 Axle and Gear Ford 8.8 inch internal kit, part number 20-2013-28, is a replacement gear set for Ford 8.8 inch axles with 28 splines and an open differential case. It is meant for repairs where worn or damaged internal gears need replacing and the carrier stays in place.
The kit suits front and rear axle locations, and the axle type is the detail to match.
Key features
- 28 spline axle fit
- Open differential case design
- Front and rear axle locations listed
- Ford 8.8 Inches axle type
Front and rear axle care
Front and rear 8.8 inch axles see different loads, and the front unit often works harder in four-wheel drive. Front differentials also tend to collect more road spray and grit at the pinion seal. Checking the seal and vent regularly helps keep the internal gears clean and reduces the chance of an early rebuild.
Gear mesh is set during assembly, so a shop that checks contact pattern and pinion depth can prevent noise. Once the new set is installed, watch for temperature rise and new noise during the first stretch of driving. Heat or a new whine usually means the setup needs another look.
- Inspect pinion seal for leaks
- Check carrier bolts for tightness after break-in
- Keep the vent clear of water
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 20-2013-28 |
| UPC | 631410093230 |
| Component | Internal gear kit |
| Axle type | Ford 8.8 Inches |
| Axle location | Front and rear |
| Axle spline | 28 splines |
| Case type | Open |
Vehicle fitment
Fitment is by axle type: Ford 8.8 Inches at front and rear locations, with 28 splines. Measure your axle’s spline count and location before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Assembly needs a shop experienced with gear contact and preload, followed by a break-in period for the new gears.
What’s included
The kit’s internal gears are the only parts included. Check the package contents against your installation before starting.




