Overview
G2 Axle and Gear part 20-2021-30 is a replacement internal gear kit for GM 10 bolt 8.5 inch differentials. It is designed for 30 spline axles with an open case and suits owners repairing worn or damaged internal gears.
The set works in front or rear positions on the stated axle type. Because no vehicle years are named here, verify the axle housing and the spline count rather than relying on a model name.
Key features
- Internal gear set for GM 10 bolt 8.5 inch axles
- Front or rear axle location
- 30 splines on the axle spline
- Open case, for an open differential
- Direct fit by axle type, stated by the maker
Spline count and axle matching
Spline count decides whether a gear set can be used at all. The teeth on a side gear hub have to engage the axle shaft splines exactly, so a count that is close but not identical can strip gears, slip under load or damage the hub. Matching the axle type alone is not enough; the spline count, the case style and the axle location all need to agree with the differential you are repairing.
Before ordering, pull a shaft and count the splines yourself, then check the housing markings or casting numbers against the axle type. Keep the old gears until the new set is fitted, since they can help confirm what the original arrangement was. If the count or case style does not match, the correct move is a different kit, not a forced installation.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 20-2021-30 |
| UPC | 631410093285 |
| Axle type | GM 10 Bolt 8.5 Inches |
| Axle location | Front or rear |
| Axle spline | 30 splines |
| Case type | Open |
Vehicle fitment
Only the axle type is specified here; no model years are named. Coverage is limited to GM 10 bolt 8.5 inch axles with 30 splines and an open case, in front or rear positions.
Compare the spline count and axle type carefully, since both must match your differential. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear set work is best left to a shop with differential experience, since mesh and backlash decide how the new gears run. Plan on a break-in period after assembly.
What’s included
The kit is the internal gear set only, used to replace damaged or worn gears inside the differential. Check the package contents against your installation before starting.
Not included: Axle shafts, the housing and the full carrier are not included here.



