Select your vehicle
-13%

G2 Chrysler 8.25 Inch 27 Spline Internal Kit – 20-2029-27

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear 20-2029-27 internal gear kit for Chrysler 8.25 inch rear axles
  • 27 spline axle, open case
  • Replacement gears for worn or damaged internal parts
  • Matched by axle type; no model years are given

Description

Overview

The G2 Axle and Gear 20-2029-27 is a replacement internal gear kit for rear Chrysler 8.25 inch differentials built with 27 splines and an open case. It is intended for renewing damaged or worn internal gears without replacing the full carrier.

The 27 spline count is the key match point, so this version fits only axles with 27 splines. Count the splines before ordering, since fit depends on that number.

Key features

  • Replacement internal gears for a Chrysler 8.25 inch rear axle
  • 27 spline axle spline count
  • Open case style
  • Offered as a direct fit for the listed axle type
  • Replaces worn or damaged internal gears

Spline count and gear wear

The spline count controls how the gears sit on the shaft, so it matters as much as the axle size. Worn spline teeth can let a gear load unevenly, and a new gear set will not solve a splined connection that is already rounded or polished. Inspect the spline teeth for sharp edges and wear marks before installing the kit.

Gear wear on this type of axle often shows up as a whine under steady throttle or a change in tooth contact on the gear faces. When gears are replaced, the bearings, washers and shims should be checked at the same time, because they set the preload and mesh. A shop with differential experience can measure these quickly during the rebuild.

Specifications

Brand G2 Axle and Gear
Part number 20-2029-27
UPC 631410107753
Axle type Chrysler 8.25 Inches
Axle location Rear
Axle spline 27 splines
Case type Open

Vehicle fitment

The maker attaches no make, model or year to this kit. Coverage is the rear Chrysler 8.25 inch axle type with 27 splines and an open case.

Count the splines on your rear axle first, since the 27 spline count is the deciding match. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A 27 spline gear set is professional work: gear mesh and backlash need to be set during assembly, and the new gears need a break-in period. Have a differential specialist complete the job.

What’s included

The kit is an internal gear set for replacing damaged or worn gears in the differential. Check the package contents against your installation before starting.

Not included: Chrysler housing, carrier and axle shafts are not part of this kit.

SKU: G/220-2029-27 Category:

Specification

Shipping weight 7.00 lbs
Package dimensions 6.00 × 6.00 × 6.00 in
brands

Questions & Answers

Will the G2 20-2029-27 fit my Chrysler 8.25 inch rear axle?

It fits a rear Chrysler 8.25 inch axle with 27 splines and an open case. Confirm fit for your vehicle's year, model and trim before ordering, and compare the spline count and axle size first.

Why does the spline count matter for this kit?

The kit is built for 27 splines, and the spline count is part of the match. A 29 spline or other count needs a different kit, so count the splines on your axle first.

What is the UPC and part number?

The UPC is 631410107753 and the part number is 20-2029-27. The product is G2 Axle and Gear's internal gear kit, so the housing and carrier are not part of it.

Can worn spline teeth damage a new gear set?

Yes. Worn or rounded splines on the axle shaft or side gear can let the gear bind, load unevenly or slip under torque. Inspect the spline teeth for sharp edges and polished wear before installing new gears.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon