Overview
The G2 Axle and Gear 20-2021-28 replaces the internal gears of a GM 10 bolt 8.5 inch differential that has 28 splines and an open case. Worn or damaged gears can be swapped out with this set, so the full differential carrier can stay in service.
It suits either the front or the rear position on the GM 10 bolt 8.5 inch axle type, which makes it useful for both ends of a matching vehicle. Match the axle type and spline count before ordering, since those are the fitment markers that matter here.
Key features
- Replacement internal gears for GM 10 bolt 8.5 inch axles
- Fits front and rear axle locations
- Stated by the maker as a direct fit for this axle type
- 28 spline axle spline count
- Open case style
Front versus rear use
Front and rear differentials share a design but carry different loads. A front unit must also turn the wheels through steering, so its gears and bearings see different stresses than a rear unit under the same driving. When both axles on a vehicle are due for service, treat each one as its own job and confirm the axle type and spline count on each housing separately.
When fitting a set to a front axle, pay attention to the pinion angle, the bearing preload and the shim stack, since these set how the teeth mesh. A rear rebuild has the same checks but usually less steering-related wear to account for. Clean the carrier thoroughly and keep track of every shim and bearing cup as it comes out.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 20-2021-28 |
| UPC | 631410093278 |
| Axle type | GM 10 Bolt 8.5 Inches |
| Axle location | Front or rear |
| Axle spline | 28 splines |
| Case type | Open |
Vehicle fitment
Fit depends on the axle itself: GM 10 bolt, 8.5 inch axles with 28 splines and an open case, in front or rear positions.
Front and rear positions both apply, so match the position on your vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set gear mesh and backlash on the bench before the carrier is reassembled; this is professional work for a set like this. Expect a break-in period after the new gears are in service.
What’s included
It is an internal gear set for replacing worn or damaged gears. Check the package contents against your installation before starting.
Not included: The complete carrier and axle shafts are not supplied in this kit.





