Overview
The G2 Axle and Gear 20-2023 is a replacement internal kit for GM 14 bolt 10.5 inch rear differentials with 30 splines. It provides replacement gears for an open differential, so worn or damaged internal parts can be renewed without replacing the whole carrier.
The set includes side gears, spider gears, thrust washers, a cross shaft and a retaining pin. Fitment rests on the GM 14 bolt 10.5 inch axle type, so compare that size against your housing before ordering.
Key features
- Side gears and spider gears for an open differential
- Thrust washers, cross shaft and retaining pin in the kit
- GM 14 bolt 10.5 inch rear axle type
- 30 spline axle spline count
- Direct fit for the listed axle type
Reading a 14 bolt carrier
The side gears and spider gears in an open carrier work together to let each wheel turn at its own speed. When one set wears, the typical symptoms are a clunk on tight turns, a wheel that spins freely on a slippery surface, or a knocking that changes with speed. Look at the gear faces, the thrust washer surfaces and the cross shaft bore for scoring, since these parts wear together.
Because the cross shaft and retaining pin hold the internal assembly in place, reassembly needs care. Confirm that the pin is seated fully, that the washers are the correct thickness, and that the gears turn freely before closing the case. Gear setup and backlash should be finished by a shop with differential experience.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 20-2023 |
| UPC | 631410093308 |
| Axle type | GM 14 Bolt 10.5 Inches |
| Axle location | Rear |
| Axle spline | 30 splines |
| Case type | Open |
| Included parts | Side gears, spider gears, thrust washers, cross shaft, retaining pin |
Vehicle fitment
Coverage is set by the GM 14 bolt 10.5 inch rear axle type with 30 splines and an open case. The maker attaches no particular car or truck model to it.
Compare the 14 bolt housing and spline count with your own axle, since this is a different axle type from the GM 10 bolt kits. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cross shaft and retaining pin are part of the assembly, so a shop with differential experience is the usual route. Gear setup and a break-in period are needed after assembly.
What’s included
The kit includes side gears, spider gears, thrust washers, a cross shaft and a retaining pin, all for an open differential.
Not included: Axle housing, axle shafts and the carrier case are not part of this kit.



