Select your vehicle

G2 Chrysler 10.5 Inch Ball Milled Aluminum Cover – 40-2097MB

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Ball milled aluminum rear cover, powder coated
  • Titled for Chrysler 10.5 inch axles; axle type field reads Chrysler 10.25 Inches AAM
  • Extra oil capacity
  • Part number 40-2097MB, UPC 631410113129

Description

Overview

The G2 Axle and Gear 40-2097MB is a ball milled aluminum rear differential cover, powder coated, for the Chrysler 10.5 inch axle named in its title. It protects the ring and pinion and is designed to help cool gear oil, which the brand links to prolonged bearing life. The cover is made from high strength, heat treated aluminum to withstand direct hits.

The cover is sized for a 10.5 inch Chrysler axle, and its axle type is Chrysler 10.25 Inches AAM. Measure the housing and confirm the size before installing, since the two sizes differ.

Key features

  • Ball milled aluminum styling
  • High strength, heat treated aluminum construction
  • Designed to help cool gear oil for prolonged bearing life
  • Powder coated finish
  • Extra oil capacity

Powder coat and upkeep

Powder coat protects the cover from road salt and trail grit, but it can chip where stones strike the edges. Touch up chips with a matching coating before rust starts, and keep the mating face free of coating buildup, since that can keep the gasket from seating flat.

Ball milled styling is cosmetic and does not change how the cover works. Choose the cover after the axle is measured and confirmed. If the housing turns out to be a different Chrysler variant than expected, the cover may need a different gasket or bolt pattern, so keep the old cover until the new one is confirmed to fit.

After installation, look for seepage around the bolts over several drives and re-torque as the gear oil warms. Clean the cover with a mild solvent and a soft brush rather than abrasive pads.

Specifications

Brand G2 Axle and Gear
Part number 40-2097MB
UPC 631410113129
Material Aluminum, heat treated
Finish Powder coated
Axle location Rear
Axle type Chrysler 10.25 Inches AAM (title: Chrysler 10.5 Inch)
Popular axle manufacturer Chrysler
Oil capacity Extra capacity
Fitment Universal fit

Vehicle fitment

Fit is by rear axle size, and the cover is universal fit. Its 10.5 inch and 10.25 inch AAM sizes differ, so measure the housing before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Confirm the gasket and hardware are in the box before you start the install.

SKU: G/240-2097MB Category:

Specification

Shipping weight 15.00 lbs
Package dimensions 13.00 × 13.00 × 5.00 in
brands

Questions & Answers

What axle size is the G2 40-2097MB made for?

The cover is sized at 10.5 inches Chrysler and its axle type is Chrysler 10.25 Inches AAM. Measure your rear housing and confirm the size before installing, since the two sizes differ.

What finish and material does this cover have?

It is aluminum with a powder coated finish. The aluminum is heat treated and high strength, and the cover adds extra oil capacity.

Is this cover tied to a specific vehicle?

It is universal fit, with no model years or trims, so axle size decides fit. The UPC 631410113129 and part number 40-2097MB are handy when comparing covers.

How do I keep a powder coated cover from rusting?

Clean off road salt and mud after wet trips, and touch up any chips down to bare metal with a coating made for the purpose. Avoid abrasive pads that wear the finish away.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon