Overview
This high strength replacement spindle, part 99-2033-4 from G2 Axle and Gear, is built for the front Dana 44 axle.
The manufacturer offers the spindle as a new option for owners who would otherwise search salvage yards for worn spindles.
Spindle replacement tips
The spindle carries the hub, bearings and steering knuckle joint at the front corner, so it takes both steering and braking loads. Replacing one usually involves the bearings, seals, brake rotor and sometimes the kingpin or tie rod connections. Clean and inspect each mating surface before the new spindle goes on, since a worn kingpin bore or damaged bearing seat will affect alignment and wear.
Front axle work usually means checking alignment after installation, because spindle and knuckle changes move the wheel angle. Bearings and seals are often replaced alongside a new spindle, and brake components should be checked for wear at the same time.
- Inspect kingpin bores and bushings for wear
- Replace bearings and seals with the spindle
- Recheck front alignment after installation
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 99-2033-4 |
| UPC | 631410097597 |
| Axle location | Front |
| Axle type | Dana 44 |
Vehicle fitment
No vehicle is named for this spindle. Universal fit is shown, so compare the front Dana 44 application with your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One spindle, part 99-2033-4.







