Overview
The G2 Dana 60 front axle spindle, part number 99-2034-8, is a replacement spindle for Dana 60 front axles from G2 Axle and Gear. It is a high strength replacement for a worn spindle and is offered for most popular applications.
It is a front axle spindle with a Dana 60 axle type. It carries a Universal Fit label, and no individual vehicles or model years are linked to it.
Key features
- Front axle location
- Dana 60 axle type
- High strength replacement design
- Manufacturer fitment label reads Universal Fit
Installing a replacement spindle
A front spindle carries the hub and bearing assembly, so its fit to the steering knuckle and brake parts has to be right before the wheel goes back on. Clean the mounting surfaces, check for burrs, and confirm the bolt pattern and axle side match the spindle you are fitting. Because this spindle is offered for most popular applications, measuring the existing part is the most dependable check.
Replacing a worn spindle often means replacing the bearings and seals as well, since they ride on the surface being swapped. Inspect the brake backing plate, ball joints and tie rod ends for wear while the parts are apart. Follow your service procedure for bearing preload and nut torque, and re-check the wheel after the first few trips.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 99-2034-8 |
| UPC | 631410097627 |
| Axle location | Front |
| Axle type | Dana 60 |
| Fitment label | Universal Fit |
Vehicle fitment
Fitment is set by the Dana 60 front axle type and the Universal Fit label, with no vehicles or model years linked to the spindle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only one spindle is included. Hub, bearings and mounting hardware are separate items.







