Overview
The kit is a front wheel bearing kit for the Dana 35 IFS front axle. It fits the Ford Ranger, Ford Explorer, Ford Bronco II and Dodge Dakota, with years and trims covered in the vehicle details below.
Each kit holds a Timken inner bearing and race, a Timken outer bearing and race and a wheel bearing seal, all for one side.
The kit is made for 90-97 Ford Dana 35 applications and also carries the 90-95 Dana 35 IFS designation. Confirm your exact year and trim before ordering.
The Dana 35 IFS front axle sits under several compact Ford trucks and SUVs, and this kit also fits a Dodge Dakota. Because different Dana designs sit under similar trucks, identify the actual axle rather than relying on the model name.
Key features
- All parts for one side
- Timken inner wheel bearing and race
- Timken outer wheel bearing and race
- Wheel bearing seal
- For the Dana 35 front axle
- Front position
Identifying your front axle
Several Dana designs were used under compact Ford trucks, and some look similar at a glance. Identifying the actual axle matters more than the model name. Look for an axle code or stamped tag on the housing, and compare the knuckle design with a reference photo before ordering.
Once the axle is confirmed, plan the job around the hub and knuckle. The bearings sit inside a small hub, so check the seal and the bearing surfaces when the hub is open. Pack the bearings with fresh grease and install the seal square, since a misaligned seal will leak quickly.
- Read the axle code on the housing
- Compare the knuckle with a reference photo
- Inspect the seal and bearing surfaces when open
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 30-8024 |
| UPC | 631410095395 |
| Part type | Front wheel bearing kit |
| Bearing brand | Timken |
| Axle | Dana 35 (IFS) |
| Position | Front |
| Kit coverage | All parts for one side |
Vehicle fitment
The kit fits these vehicles:
- 1997–1999 Dodge Dakota (Base, SLT, Sport)
- 1990 Ford Bronco II (Eddie Bauer, XL, XL Sport, XLT, XLT Plus)
- 1991–1995 Ford Explorer (Eddie Bauer, Expedition, Limited, XL, XLT)
- 1991–1995 Ford Explorer Sport
- 1990–1998 Ford Ranger (Custom, S, STX, Splash, Sport, XL, XL Sport, XLT)
The Dakota fits 1997–1999 and the Bronco II fits 1990 only. Other Bronco II years and F-series trucks are not covered, so confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
One kit serves one side, so a pair of wheel ends takes two kits. Check which front axle your truck has, since several Dana designs were used.
What’s included
A Timken inner bearing and race, a Timken outer bearing and race and a wheel bearing seal, for one side.
Not included: bearing grease and a second kit for the opposite side.





