Overview
The G2 Axle and Gear 30-8028 is a front wheel bearing kit for the Toyota 8 inch front axle on the 1979–1985 Toyota Land Cruiser, 1980–1985 Toyota Pickup and 1984–1985 Toyota 4Runner.
The kit contains a Timken inner bearing and race, a Timken outer bearing and race and a wheel bearing seal, all for one side.
The 30-8028 is for 79-85 Toyota models. Its coverage is 1979–1985 Land Cruiser, 1980–1985 Pickup and 1984–1985 4Runner, with exact years for each vehicle in the fitment section.
The Toyota 8 inch front axle is a solid axle used under 1979 to 1985 trucks and Land Cruisers. The kit bundles bearings, races and a seal so the knuckle can be serviced with everything in one box. Locking hubs and Birfield joints are separate parts and are not included. Confirm the bearing numbers against the old bearings before ordering.
Key features
- All parts for one side
- Timken inner wheel bearing and race
- Timken outer wheel bearing and race
- Wheel bearing seal
- For the Toyota 8 inch axle
- Front position
Axle and bearing notes
The Toyota 8 inch front axle is a solid axle, so the wheel bearings sit on the knuckle and hub rather than on a separate hub assembly. Solid-axle trucks carry bearing loads through the whole axle, which makes correct preload and seal condition important for long life. When fitting a new bearing set, check the spindle and bearing bore for wear, since a worn surface shortens a new bearing even when it is set correctly.
Many owners also consider a locking hub or a Birfield joint at the same time. Those are separate parts, so plan their purchase on their own and confirm they suit the same axle before ordering.
- Inspect the spindle for scoring
- Use fresh grease for each service
- Check the hub seal for hardening
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 30-8028 |
| UPC | 631410095418 |
| Part type | Front wheel bearing kit |
| Bearing brand | Timken |
| Axle | Toyota 8 inch |
| Position | Front |
| Kit coverage | All parts for one side |
Vehicle fitment
The 30-8028 fits these Toyota models:
- 1984–1985 Toyota 4Runner (DLX, SR5)
- 1979–1985 Toyota Land Cruiser (Base)
- 1980–1985 Toyota Pickup (Base, DLX, SR5)
Only the 4Runner (1984–1985), Land Cruiser (1979–1985) and Pickup (1980–1985) are listed. Later years and the Tacoma and Tundra are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because each kit covers one wheel end, buy two for a complete front axle and repack the bearings with fresh grease.
What’s included
A Timken inner bearing and race, a Timken outer bearing and race and a wheel bearing seal, for one side.
Not included: bearing grease and a second kit for the other side of the axle.
