Overview
The Omix-ADA 16707.03 is a front wheel bearing hub cup, an inner cup, for the 1977-1983 Jeep CJ5, the 1977-1986 Jeep CJ7 and the 1981-1985 Jeep Scrambler. A hub cup, also called a bearing cup or bearing race, is the hardened ring that a wheel bearing rolls against inside the hub.
It is a direct OE replacement built to the original specifications and carries a limited five year warranty. This part is for the front position and suits owners and shops repairing worn front wheel bearings on these classic Jeep models. Measure the old cup and compare before fitting.
Key features
- Front wheel bearing hub cup, an inner cup
- Front position
- Direct fit, direct OE replacement part
- Built to the original specifications
- Limited five year warranty
- Fitment list covers the CJ5, CJ7 and Scrambler
Caring for worn bearing cups
A bearing cup is pressed into the hub and wears where the rollers run. When it is pitted, discolored from heat, or has rough edges, the bearing will not seat correctly, and the wheel can develop play or noise. Cups are seldom replaced alone; the bearing that rides on them should be replaced at the same time to match the wear pattern.
Driving with a worn bearing can make steering feel loose and can affect braking stability, so address play promptly. When pressing a new cup, keep it square in the bore, and avoid striking the cup’s outer edge with a hammer. Clean the hub bore thoroughly and inspect the spindle for scoring before setting the bearing.
- Check the cup for pitting or heat marks
- Press the cup square in the hub
- Clean the bore before installation
- Replace the grease seal when the hub is opened
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16707.03 |
| UPC | 804314044152 |
| Product type | Wheel bearing hub cup (inner cup) |
| Position | Front |
| Fit type | Direct fit |
| Limited five year warranty | Limited five year warranty |
Vehicle fitment
The manufacturer fitment list for the Omix-ADA 16707.03 hub cup includes these vehicles:
- 1977–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1977–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)
- 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
The list covers only the CJ5, CJ7 and Scrambler years shown above. It does not include the Wrangler YJ, TJ or later models, the Cherokee, or other Jeep vehicles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wheel bearing work affects steering feel and braking, so professional installation is a good idea. Replace bearing cups together with the matching bearings and seals, keep the parts clean, and follow the torque values in your service information.
Set bearing preload to the value in your service information, support the vehicle on rated jack stands, and re-check wheel bearing play and lug nut torque after the first miles of driving.
What’s included
- Front wheel bearing hub cup (inner cup)
Not included: the matching wheel bearing, seals and grease are not included with this part.









