Overview
The FOX Performance Series 2.0 Smooth Body IFP Shock Absorber, part number FOX985-24-219, is a rear monotube shock for the 2020–2026 Jeep Gladiator. It is gas charged, and its internal floating piston keeps shock oil apart from the nitrogen chamber.
The Gladiator’s rear suspension carries a lot of load on rough terrain, so FOX aims this shock at steady damping. The high flow damping piston uses valving matched to the application, and the design is built for comfort on the road and predictable control off-road.
The Gladiator’s rear shocks carry the weight of the bed and rear axle, so the damping has to stay controlled when the truck is loaded or crossing uneven ground. This is a rear part and is not a front replacement.
Gladiator owners should confirm that their model year and trim fall within the list, since the range is limited to 2020 through 2026.
Key features
- Internal floating piston separates oil from the nitrogen gas.
- Keeps oil aeration out of the damping, so performance stays consistent.
- High flow damping piston with application-specific valving.
- Monotube layout with a gas charge.
- Rear-mounted position for the Gladiator’s rear axle.
Load and rear axle care
The rear axle on a Gladiator sees changing weight from the bed, passengers and gear, and the shocks control how quickly that weight moves. A shock that has lost damping can let the axle hop on washboard or cause the rear to sway through a turn. Regular inspection helps catch these changes before they affect steering and braking.
Care is straightforward. Wipe the shock body after mud runs, check the mounting bolts after the first few trail outings, and look for oil streaks along the body. Rubber bushings and mounts take the most stress, so replace them if they crack or feel loose. When the rear shock is replaced, check the bump stops and springs too.
- Clean mud and grit from the body after trail use
- Recheck mounting bolts after the first few outings
- Look for an oil film or a dented body
- Inspect bushings for cracking or play
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX985-24-219 |
| Shock series | Performance Series |
| Position | Rear |
| Location | Rear |
| Shock type | Monotube |
| Charge | Gas charged |
Vehicle fitment
Fits the 2020–2026 Jeep Gladiator across its trim levels, including Altitude, High Altitude, Mojave, Overland, Rubicon and Willys. Wrangler JL and other Jeep models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock absorber. Check the mounting hardware against your installation before starting.









