Overview
The FOX Performance Series 2.0 Smooth Body IFP Shock Absorber, part number FOX985-24-172, is a monotube shock for the 2018–2026 Jeep Wrangler JL in two-door and four-door models. Confirm the mounting point against your Wrangler before ordering.
The internal floating piston keeps shock oil apart from the nitrogen gas chamber. The damping is tuned for a comfortable on-road ride and predictable control off-road, and the aluminum body is metal-impacted for cooling and corrosion resistance.
Because the listed location and position differ, the mounting point on your JL is the detail to verify before ordering. Check that the shock attaches with a stem top upper mount and an eyelet lower mount, and confirm the lower mount clears your current shock. The body is 2.0 in and the aluminum is metal-impacted to help with cooling.
The 2018 to 2026 range covers both two-door and four-door Wrangler JL models, including Unlimited. A Gladiator is a different truck and is not covered.
Confirm the lower mount clearance before tightening anything, because the shock sits close to the axle on the Wrangler JL.
Key features
- Internal floating piston design isolates the oil from the gas chamber.
- Eliminates oil aeration for steady damping.
- High flow damping piston with application-specific valving.
- Metal-impacted aluminum body that resists rust.
- Stem top mount and eyelet lower mount on a 2.0 in body.
Measuring before you buy
Measuring the old shock is the fastest way to avoid a mismatch on a Wrangler JL. Record the eye-to-eye length at both ends, note whether the upper end uses a stem and the lower end uses an eyelet, and check the stroke. Taking these measurements in the driveway, with the vehicle safely supported, takes only a few minutes and can prevent a return.
Shock designs on this generation of Wrangler can sit close to the axle and frame, so clearance matters as much as length. Watch the suspension travel when the axle droops and compresses, and make sure the new body does not rub on brake lines or the track bar. Even a small difference in length can change how the suspension feels.
- Note the eye-to-eye length before removing the old shock
- Check clearance near the axle and brake lines
- Inspect the bushings and hardware at the same time
- Replace in pairs when one side has failed
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX985-24-172 |
| Shock series | 2.0 Performance Series |
| Location | Front |
| Position | Rear |
| Top mount | Stem top |
| Bottom mount | Eyelet |
| Body diameter | 2.0 in |
| Shock type | Monotube |
| Charge | Gas charged |
Vehicle fitment
Fits the 2018–2026 Jeep Wrangler JL two-door and four-door models, including the Unlimited and Rubicon versions. Gladiator and Wrangler JK models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber. Check the mounting hardware against your installation before starting.













