Overview
The Fabtech FTS20277 is a front left outer replacement tie rod end for the steering linkage, designed as a heavy duty upgrade over a basic replacement unit. Fabtech developed it to improve steering strength and service life.
It suits owners who want a stronger outer joint in the steering linkage. Compare the joint with the one you are replacing before installing.
Key features
- Heavy duty upgrade over a basic replacement tie rod end
- Front left outer position
- Developed to improve steering strength
- Developed to extend service life
- Single unit
Tie rod wear signs
Outer tie rod ends carry the steering force from the linkage to the wheel, so they wear faster than inner ends in many setups. Rubber boots keep grit out of the ball joint, and once the boot tears, the joint can start to play. A heavy duty replacement can help with steering feel, but a worn tie rod is also a sign to check the inner end, idler arm and steering box.
Replacing one outer end often means the alignment has to be redone, because toe changes as the length changes. Measure the old end’s length before removing it when possible, and have the front end checked after installation. Driving with a loose end can cause uneven tire wear, so address it promptly.
- Look for torn boots and grease loss
- Check for play by rocking the wheel
- Compare the new end’s length with the old one
- Recheck toe after installation
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS20277 |
| UPC | 67486602297 |
| Position | Front left outer |
| Quantity | Single |
| Fitment | Direct fit (manufacturer listing) |
Vehicle fitment
It is a direct fit tie rod end, but no vehicle years or models are tied to it. Verify your vehicle’s year, model and trim before ordering, then compare the joint with the one you are removing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the front left outer position matches the joint you are removing before installing.
What’s included
One front left outer tie rod end, sold as a single unit. Check your installation hardware before starting.






