Overview
The Moog left-hand outer tie rod end is a steering part for the 2007 to 2010 Jeep Wrangler JK, including Rubicon and Unlimited models in both 2-door and 4-door versions. The outer tie rod end connects the steering link to the left knuckle, which lets the wheel pivot as the steering turns. The part is sold individually.
The Problem Solver line is designed for like new steering, simpler installation and longer life. It uses a powdered metal gusher bearing that routes grease to the stud, a patented cover plate for tighter tolerances, and a full ball metal stud with 360 degrees of rotation. Patent pending Sunoloy coated metal bearings are part of the design.
Key features
- Left-hand outer position
- Gusher bearing design.
- Patented cover plate.
- Full ball metal stud with 360 degrees of rotation.
- Patent pending Sunoloy coated bearings.
Wrangler JK steering on rough ground
The JK Wrangler runs a solid front axle with a long steering linkage, so the outer tie rod end sees constant articulation on trails and shock loads from rough ground. Joint wear speeds up with larger tires and lifted suspensions, and the steering often shows the effect first as a loose feel at highway speed.
After an outer end is replaced, inspect the drag link and track bar ends as well, since they carry the same loads. Keep a grease gun and a torque wrench on hand, and check the steering again after the first trail outings.
- Grease serviceable joints on schedule
- Check the boot after washing the vehicle
- Retorque the castle nut after initial driving
- Look for play at the knuckle side
Specifications
| Brand | Moog |
|---|---|
| UPC | 80066449067 |
| Product type | Outer tie rod end |
| Position | Left-hand outer |
| Fits | 2007 to 2010 Jeep Wrangler JK; Rubicon and Unlimited; 2-door and 4-door |
| Sold as | Individually |
Vehicle fitment
It fits the 2007 to 2010 Jeep Wrangler JK, including Rubicon and Unlimited models in 2-door and 4-door versions. Years 2011 and later are not covered, and other Wrangler generations are not covered either. Confirm the year, body style and left side before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A tie rod end replacement changes toe, so a front alignment is normally needed afterward. Tighten the castle nut to specification and check the steering for play before driving.
What’s included
One left-hand outer tie rod end, sold individually.
Not included: The nut, cotter pin and boot are not included. Check those against your installation before starting.









