Overview
The Fabtech FTS71002 is a heavy duty tie rod kit that includes two outer tie rods for the front steering. Fabtech built the extra large diameter assemblies to resist bending and breakage when running large tires off-road.
The kit directly replaces original equipment units and attaches to the stock center link. It is made for non-dually models with Fabtech suspension only, and it will not work with dual steering stabilizers.
Key features
- Extra large diameter tie rod assemblies
- Extra large diameter construction helps resist bending and breakage when running large tires off-road.
- Includes two outer tie rods
- Directly replaces original equipment units
- Built for non-dually models with Fabtech suspension
Signs of tie rod wear
Tie rods carry steering force from the center link to the wheels, so wear in the outer ends usually shows up as steering play, wandering on the highway, or uneven front tire wear. When outer tie rods are replaced, inspect the rest of the steering linkage at the same time, including the center link this kit attaches to and the ball joints that support the knuckles.
Larger tires increase the load on steering components, which is why heavier tie rods are often chosen for off-road builds. After installation, have toe alignment checked, since changes to tie rod fitment affect it. Recheck the fasteners after the first few trail runs.
- Check the center link for play before installing
- Inspect the boots and joints at each service
- Recheck fasteners after the first few trail runs
- Have toe alignment checked after the work
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS71002 |
| UPC | 674866014398 |
| Kit contents | Two outer tie rods |
| Position | Front right outer |
| Diameter | Extra large |
| Application | Non-dually models only |
| Suspension | Fabtech suspensions only |
| Steering stabilizers | Not compatible with dual steering stabilizers |
| Fitment | Direct fit (manufacturer listing) |
Vehicle fitment
It is a direct fit for non-dually models with Fabtech suspension. Dual steering stabilizer setups are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit attaches to the stock center link, so that center link must be in serviceable condition before installing. Do not use the kit with dual steering stabilizers, as Fabtech states.
What’s included
Two outer tie rods.
Not included: The stock center link, which the kit attaches to.







