Overview
The Fabtech FTS20460 is an inner replacement tie rod end for the steering linkage. It replaces part number FTS71002 and is a heavy duty upgrade over a stock unit.
It offers a stronger inner joint for owners who want improved steering strength and longer service life. Check your vehicle’s year, model and trim before buying, then compare the part numbers.
Key features
- Inner position
- Replacement for part number FTS71002
- Heavy duty upgrade over a stock unit
- Improved steering strength
- Single unit
Inner tie rod wear
The inner tie rod end sits between the rack or steering box and the outer end, so it moves with the steering and the suspension travel. Because it is hidden behind the wheel and often reached from underneath, its wear can go unnoticed until steering starts to wander. A heavy duty inner end is a reasonable choice when the stock joint has worn out, though the rack boot should be inspected at the same time.
Inner ends are commonly replaced with the outer ends, since alignment is affected by both. After installation, recheck toe and centre the steering wheel, then test the vehicle at low speed before longer drives. Keep an eye on the boot, which protects the joint from grit and moisture.
- Inspect the rack boot for splits
- Check for play at the inner joint
- Re-centre the steering wheel after installation
- Replace the boot clamp when the joint comes out
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS20460 |
| UPC | 674866028432 |
| Position | Inner |
| Replaces part number | FTS71002 |
| Quantity | Single |
| Fitment | Direct fit (manufacturer listing) |
Vehicle fitment
It is a direct fit inner tie rod end, with no vehicle years or chassis codes tied to it. Check your steering setup and the inner joint you are replacing before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It replaces FTS71002, so compare the two part numbers before installing.
What’s included
One inner tie rod end. No other hardware is stated.







