Overview
The Fabtech FTS24210 is a heavy duty drag link kit for the 2019 and 2021–2026 Jeep Wrangler Unlimited (JL) four-door models, relocated on the steering knuckle to retain the factory steering geometry.
The drag link keeps the stock pitman arm and the factory steering geometry. It is designed for bind-free operation at full articulation and eliminates bump steer throughout the travel. It does not increase the load on the steering box the way a dropped pitman arm can. A drag link carries motion from the pitman arm on the steering box to the steering knuckle, so it is worth considering when a lifted Wrangler shows bump steer or binding at full articulation.
Key features
- Heavy duty drag link
- Relocated on the steering knuckle
- Retains the factory steering geometry with the stock pitman arm
- Bind-free operation at full articulation
- Eliminates bump steer throughout the travel.
- Does not increase load on the steering box like a dropped pitman arm can
- Direct fit
Signs of steering linkage wear
Steering linkage wear often shows up as a loose or wandering feel, a steering wheel that does not return to center, or vibration over rough ground. On a lifted Wrangler, the drag link and its joints move through more angle than stock, so the first signs often appear at the ends of the link.
When inspecting, grab the link and try to move the joints by hand with the vehicle safely supported. Any play at the joints, cracked bushings or damaged boots call for replacement. The pitman arm and knuckle work together with the link, so check them at the same time and keep alignment in mind when reassembling.
- Feel for play at each joint
- Look for torn boots and cracked bushings
- Check the pitman arm and knuckle together
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS24210 (also shown as FABFTS24210) |
| Product type | Drag link kit (steering) |
| Design | Heavy duty, relocated on the steering knuckle |
| Pitman arm | Works with the stock pitman arm |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Fabtech FTS24210 drag link kit covers the 2019, 2021–2026 Jeep Wrangler (JL) (Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door)).
It fits the 2019 and 2021–2026 Jeep Wrangler Unlimited JL four-door models. Confirm fit for your vehicle’s year, model and trim before ordering, since the fit covers only four-door Unlimited JL models in those years.
Installation notes
Steering components are safety-critical, so professional installation is a good choice. Follow the torque values and installation steps for your kit.
- Have the alignment checked after installation.
- Check the steering for binding through full lock to lock travel before driving.
- Re-check fasteners after the first miles of driving.
- While the steering is apart, inspect the pitman arm, steering knuckle and related steering joints for wear, and follow the steps for relocating the link.
What’s included
Check the package contents against your installation before starting.









