Overview
The Fabtech K20171DL is an 8-inch 4-link lift with Dirt Logic SS shocks for the 2005–2007 Ford F-250 Super Duty. The arms are direct replacements for the factory arms and remove the upper ball joint, using a 1-inch ID stainless American Uniball pin that fits the factory ball joint taper.
The chromoly tubing reduces flex compared with stock arms, and the built-in additional caster helps when a leveling kit has been used. The kit pairs the arms with Dirt Logic 2.5 coilover shocks for increased wheel travel. The system fits factory aluminum suspension vehicles only.
Dirt Logic SS shocks come with the kit, and the arms are paired with Dirt Logic 2.5 coilover shocks for more wheel travel.
Key features
- 8-inch lift height
- Chromoly tubing for the arms
- 4340 heat-treated Uniball pin
- Built-in additional caster
- Direct replacement for factory arms
- Dirt Logic SS shocks included
Suspension compatibility check
Before buying a lift of this type, look at how the factory suspension is built. Coil and aluminum-equipped setups differ in arm shape, joint placement and shock mounting, so a part that fits one version may not clear the other. A quick look at the underside of the front axle and the rear shock mounts usually answers the question.
Once the arms are in, the shocks and springs work together with the new geometry. Coilover shocks give adjustable damping for both road and trail use, and they hold the suspension in a predictable range when the axle travels further than stock.
- Identify the factory suspension type before ordering
- Confirm the shock mounts match the new arm angles
- Keep the OEM wheel and tire off the truck once the kit is fitted
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K20171DL |
| UPC | 674866096165 |
| Lift height | 8 inches (range 7 inches and up) |
| Suspension type | 4-link |
| Upper ball joint | Eliminated by the arm design |
| Uniball | 1-inch ID stainless American Uniball |
| Rear lift method | Lift block, U-bolts and add-a-leaf |
| Shocks | Dirt Logic SS shocks included |
| Tire and wheel fit | 295/70R17 on 17×8, 275/65R18 on 18×8, 285/55R20 on 20×9 |
| Wheel backspacing | 4 1/2-inch and 5-inch, with minor trimming |
Vehicle fitment
It fits the 2005–2007 Ford F-250 Super Duty.
It is not for all-wheel drive models, standard cab trucks or trucks with Factory AutoRide shocks, and it only fits factory aluminum suspension vehicles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before installing, check whether the vehicle has factory aluminum suspension, because the arms only fit that version. The OEM wheel and tire cannot be used with this kit.
What’s included
The 4-link arms with Uniball pins, the add-a-leaf and block and U-bolt rear kit, and Dirt Logic SS shocks.









