Overview
The Fab Fours Vengeance Series Rear Bumper, part number FS08-E1351-1, is a black rear replacement sensor bumper made from 11 gauge US steel. It keeps the OEM receiver hitch and wiring location and has two front-side openings for lights.
The openings take (4) 2×2 Dually lights or (2) 6 inch light bars, and the lights are not included. The steel is built in South Carolina and finished in a 2 stage black powder coat. The bumper weighs 65 lbs.
Check the vehicle and model year before buying this replacement bumper.
Key features
- Rear replacement sensor bumper
- Sensor compatible
- Two front-side openings for (4) 2×2 Dually lights or (2) 6″ light bars
- 11 gauge US steel
- Retains the OEM receiver hitch and wiring location
- 2 stage black powder coat
- Made in the USA
Rear bumper with lights and hitch
A rear bumper carries lights, a hitch and often a spare-tire or cargo load, so each part needs to clear the others. Route light wiring through the bumper openings with grommets and a relay, and keep it away from the tailgate hinge and the hitch. Check that the hitch pin and any cargo carrier clear the bumper and tail lights before towing.
Steel rear bumpers take impacts from rough trail use and backing into obstacles. After hard use, look at the mounting brackets and welds for cracks, and check that bolts are tight. Mud and road salt can start rust at the seams, so wash the bumper and touch up chips in the powder coat.
- Route light wiring with grommets and a relay
- Check hitch and cargo carrier clearance
- Inspect brackets and welds after hard use
- Touch up powder coat chips early
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FS08-E1351-1 |
| UPC | 5810110918 |
| Series | Vengeance |
| Material | 11 gauge US steel |
| Finish | 2 stage black powder coat |
| Weight | 65 lbs |
| Tire carrier | No |
| Integrated receiver hitch | No; keeps the OEM hitch |
| D-ring mounts | Not included |
| Lights | Not included |
| Origin | Made in South Carolina, USA |
Vehicle fitment
Fitment depends on the vehicle’s year and trim, so check the match against your vehicle before buying.
Because it is a replacement bumper, it will not fit other vehicles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper keeps the OEM receiver hitch and wiring location, so the factory hitch stays in service.
What’s included
- Vengeance rear bumper
Not included: the lights (2×2 Dually lights or 6″ light bars).









