Overview
The Fab Fours Premium Rear Sensor Bumper, part number TT14-W2851-B, is a bare steel rear bumper replacement for the 2014–2018 Toyota Tundra. It takes the place of the factory rear bumper with a formed 3/16-inch steel unit that leaves the existing receiver hitch and wiring in their original locations.
Premium bumpers combine styling with formed-steel construction. On this Tundra bumper, that means integrated steps on either side of the tailgate and D-ring recovery points. It is made in the USA from U.S. steel and supplied in bare steel.
Key features
- Integrated steps on either side of the tailgate
- 3/16-inch steel construction
- D-rings cut from 3/4-inch steel that accept shackles up to 7/8-inch
- Keeps the factory receiver hitch and wiring location
- Sensor version of the Fab Fours Premium rear bumper
- U.S. steel, 100% made in the USA
Mounting a steel bumper
A steel bumper adds real weight at the rear, so lift it with a helper or a jack and support it until all fasteners are started. Steel bumpers can flex or dent in a hard hit, so inspect the mounting points after any impact. Keep the bolts snug while fitting, then tighten them evenly once the bumper is aligned.
Rear bumpers with integrated steps and D-rings are often used for recovery, so check the D-ring welds and bolts regularly. Look for cracks around the steps and in the weld seams. Coat any bare steel spots that show surface rust to slow corrosion, especially after mud or salt exposure. Keep the hitch and wiring routed cleanly so nothing rubs against the steel.
- D-ring bolts and welds
- Step mounting hardware
- Wiring and hitch clearance
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TT14-W2851-B |
| UPC | 5810114497 |
| Product type | Rear replacement bumper |
| Finish | Bare steel |
| Steel thickness | 3/16 in |
| D-ring steel | 3/4 in, accepts up to a 7/8 in shackle |
| Weight | 115 lb |
| Fit type | Direct fit |
| Position | Rear |
| Origin | Made in the USA from U.S. steel |
Vehicle fitment
Fab Fours lists part TT14-W2851-B for the 2014–2018 Toyota Tundra.
This bumper fits the 2014–2018 Toyota Tundra only. Other Tundra years and Toyota trucks such as the Tacoma are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At 115 lb the bumper is best lifted into place with a helper or a jack. The factory receiver hitch and wiring stay in their original locations.
What’s included
One rear bumper with integrated D-ring recovery points.
Not included: Shackles for the D-rings.









