Overview
The Fab Fours FS17-T4150-1 is a black steel rear replacement bumper for the 2017 Ford F-250 Super Duty and F-350 Super Duty. It uses combination pipe and tread plate construction in a black powder coat.
The ranch bumper was restyled with the look of Fab Fours’ heavy duty plate bumpers, matched to the body lines of each model truck. Back up lights are included, the bumper has pre-drilled sensor holes, and it keeps the OEM receiver hitch and wiring locations. It is made in the USA.
Key features
- Rear replacement bumper in black powder coat
- Combination pipe and tread plate construction
- Back up lights included
- Pre-drilled sensor holes
- Retains OEM receiver hitch and wiring locations
- Made in the USA.
- Gloss black powder coat or bare steel (-B instead of -1)
Before you buy
A rear bumper carries the weight of the back of the truck and takes the first hit in a rear collision or trail hazard, so mounting strength and clearance matter. Before ordering, look at how the bumper sits relative to the tailgate, the rear step and any parking sensors, because the pre-drilled holes only help if the sensors line up.
Bumpers are often replaced together with the hitch, wiring harness and sensor brackets, so check those parts when you install. Inspect the bolts, brackets and welds once a season and after any hard impact, and touch up chips in the powder coat early to prevent rust on exposed steel.
- Check tailgate and rear step clearance
- Match the hitch and wiring plug before installation
- Touch up coating chips promptly
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FS17-T4150-1 |
| UPC | 5810112554 |
| Part type | Rear bumper |
| Position | Rear |
| Finish | Powder coat (black) |
| Construction | Combination pipe and tread plate |
| Back up lights | Included |
| Sensor holes | Pre-drilled |
| D-ring mount | Not included |
| Receiver hitch | Not included |
| Tire carrier | Not included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2017 Ford F-250 Super Duty and F-350 Super Duty in King Ranch, Lariat, Platinum, XL and XLT trims.
Only the 2017 model year is listed, so other Super Duty years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Torque all fasteners to the specified values and use only the hardware supplied. A bumper is heavy, so use a lift or helper, and professional installation is a sound choice. Disconnect the battery before working on wiring, then check the back up lights and sensors. Re-check the fasteners after the first miles of driving.
What’s included
- Rear bumper
- Back up lights
Not included: D-ring mounts, a receiver hitch and a tire carrier.














