Overview
The Fab Fours FFITT07-E1550-B is a bare Vengeance Series rear replacement bumper for the 2007–2013 Toyota Tundra. It includes a receiver hitch and has no tire carrier or D-ring mounts.
The bumper is constructed from 11 gauge US steel made in South Carolina. It has pre-cut, factory matched openings for sensors and one side opening on each side for a Rigid Industries 6-inch SR Series light, which is not included. Its weight is less than 60 lb.
Key features
- Weighs less than 60 lb
- Pre-cut, factory matched openings for sensors
- One side opening on each side for a Rigid Industries 6-inch SR Series light
- Includes a receiver hitch
- 11 gauge US steel, made in South Carolina
Protecting bare steel
A bare steel bumper needs a finish before it sees weather. Unpainted steel rusts at scratches, welds and bolt holes, and road salt speeds that process. Clean the bumper, remove any surface rust, and apply a primer suited to bare steel followed by a topcoat. Mounting the bumper before finishing makes coverage more even, though masking the sensor openings protects those areas.
The side openings for Rigid Industries lights should be planned along with the finish. If you run lights later, the openings are ready for them. If you do not, keep the openings clean and check that dirt and water do not collect inside the bumper.
Keep up with touch-ups. Chips at the edges, bolt heads and welds are the first spots to rust, so inspect them after off-road use and repair them promptly.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FFITT07-E1550-B |
| Finish | Bare steel |
| Material | 11 gauge US steel |
| Weight | Less than 60 lb |
| Position | Rear |
| Receiver hitch | Included |
| D-ring mounts | Not included |
| Tire carrier | Not included |
| Light openings | One per side for Rigid Industries 6-inch SR Series lights, not included |
| Fitment | 2007–2013 Toyota Tundra |
Vehicle fitment
It fits the 2007–2013 Toyota Tundra.
The list does not include Tundra model years 2014 and later. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bare steel is unpainted, so paint or a protective coating is needed before the bumper is exposed to weather.
What’s included
Bare rear bumper with receiver hitch and sensor openings.
Not included: Rigid Industries 6-inch SR Series lights are not included. D-ring mounts are not included.
