Overview
The Fab Fours rear bumper, part number TT16-W3651-1, is a black powder-coated replacement rear bumper for the 2016 Toyota Tacoma. It keeps the OEM receiver hitch and wiring location and adds lower steps and recovery points.
The bumper is made from 3/16-inch U.S. steel. The D-rings are cut from 3/4-inch steel and accept up to a 7/8-inch shackle. It weighs 115 lb.
Key features
- Two-stage black powder coat
- 3/16-inch steel construction
- D-rings accept up to a 7/8-inch shackle
- Retains the OEM receiver hitch and wiring location
- Made in the USA from U.S. steel
Living with a steel bumper
A heavy steel bumper changes how a Tacoma handles its rear weight and approach angle. The added mass sits low and behind the axle, so the truck may feel different when loaded, and the lower steps and recovery points reduce clearance when climbing or descending steep ground. Before setting out, check the rear suspension, shocks and tires for any change in ride height or wear that the new bumper may cause.
Steel bumpers are usually paired with a receiver hitch and sometimes a tire carrier. If you add a carrier, make sure the hitch rating and the bumper’s mounts both handle the load together. Inspect welds, bolts and the powder coat every few months. Chipped coating on bare edges is the first place surface rust starts, so touch it up early to protect the steel.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TT16-W3651-1 |
| UPC | 5810111656 |
| Finish | Two-stage black powder coat |
| Material thickness | 3/16-inch steel |
| Weight | 115 lb |
| D-ring shackle capacity | Up to 7/8-inch shackle, D-rings cut from 3/4-inch steel |
| Vehicle | 2016 Toyota Tacoma |
Vehicle fitment
It is written for the 2016 Toyota Tacoma. Confirm your truck’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
It comes as one rear bumper with its steps and D-ring recovery points. A tire carrier and hitch hardware are not included, so plan to source them separately if needed.
