Overview
The Fab Fours Vengeance Rear Bumper, part number TT16-E3651-B, is a bare steel rear replacement bumper for the 2016–2018 Toyota Tacoma. Fab Fours builds it from 11 gauge U.S. steel in South Carolina and keeps the factory receiver hitch and wiring location.
Two openings on the front sides leave room for lighting; Fab Fours names one 2×2 Dually light as the fit, with the light not included. The Vengeance Series is the brand’s lighter-weight, styled bumper line, and this one weighs 65 lb.
Key features
- 11 gauge U.S. steel construction
- Two front-side openings for lights
- Sized for one 2×2 Dually light
- Retains the OEM receiver hitch and wiring location
- Bare steel finish
- 100% made in the USA
Bare steel rear bumpers and lighting
A rear bumper with openings for lights puts the wiring and light housings close to the tailgate and the bumper’s edges. Light selection depends on the opening size and how the wiring will be routed, so check the fit of any light before drilling or mounting. Rear lights are often used for backup or for lighting the work area near the rear of the truck.
A bare steel bumper is heavier than a painted one only in appearance, but the finish matters for long-term durability. Edges and welds are the usual starting points for rust, so inspect them after washing and after any gravel or trail use. Keeping the finish intact helps the steel last.
- Test-fit lights before drilling or wiring
- Route wiring away from the tailgate hinge area
- Inspect welds and edges for rust regularly
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TT16-E3651-B |
| UPC | 5810111687 |
| Product type | Rear replacement bumper |
| Series | Vengeance |
| Finish | Bare steel |
| Steel | 11 gauge U.S. steel |
| Weight | 65 lb |
| Position | Rear |
| Fit type | Direct fit |
| D-ring mounts | Not included |
| Tire carrier | None |
Vehicle fitment
Fab Fours lists part TT16-E3651-B for the 2016–2018 Toyota Tacoma.
It fits Tacoma models from 2016 to 2018 only and is not a Tundra part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the bumper is bare steel, it will need its own protective finish if you want to keep rust off. The factory hitch location and wiring are retained.
What’s included
One Vengeance rear bumper in bare steel.
Not included: Lights for the openings, which Fab Fours does not supply with the bumper.









