Overview
The Fab Fours premium rear sensor replacement bumper, part number FS17-W4151-1, is a black powder-coated rear bumper designed to keep the rear parking sensors. It integrates the existing receiver hitch and adds lower steps and recovery points.
The bumper is 3/16-inch steel, weighs 115 lb and is made in the USA from U.S. steel. It is a direct-fit design and keeps the rear parking sensors. Confirm the model and year of your truck before ordering.
Key features
- Retains rear parking sensors
- Black powder coat finish
- 3/16-inch steel construction
- D-rings cut from 3/4-inch steel accept up to a 7/8-inch shackle
- Retains the OEM receiver hitch and wiring location
- Made in the USA from U.S. steel
Sensors and bumper swaps
Rear parking sensors are mounted in the bumper face, and their position decides how well they read the area behind the truck. Replacing a bumper means the sensors must be aligned to the same height and angle as before, or the readings can drift. Check the sensor wiring and connectors before the bumper goes on, so a fault is not hidden behind new steel.
Steel bumpers also change the approach and departure angles and the rear clearance, which matters off road. Test the sensors after mounting and again after the first rough trail, since flex and vibration can loosen connectors. Keep a record of the sensor placement so a future swap is straightforward.
- Test sensors before and after mounting
- Confirm wiring connectors are seated
- Note sensor height for future swaps
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FS17-W4151-1 |
| Finish | Two-stage black powder coat |
| Material thickness | 3/16-inch steel |
| Weight | 115 lb |
| D-ring shackle capacity | Up to 7/8-inch shackle |
| Fit listed | Direct fit |
Vehicle fitment
Confirm the model and year of your truck before ordering this bumper, and check fit against your vehicle’s year, model and trim.
What’s included
One rear bumper with steps and D-ring recovery points. Check the hitch and sensor hardware against your installation before starting.









