Select your vehicle

Fab Fours Front Full Width Truck Grumper (Black) – GR3000-1

Fab Fours

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2017–2018 Chevrolet Silverado 2500 HD and 3500 HD
  • Grille and winch bumper in one
  • Sensor cutouts, light and D-ring mounts
  • Matte black powder coat

Description

Overview

The Fab Fours Front Full Width Truck Grumper, part number GR3000-1, is a black powder-coated grille and winch bumper for the 2017–2018 Chevrolet Silverado 2500 HD and 3500 HD.

The Silverado version uses a 13-piece modular design with removable inserts, cutouts for airflow and sensors, a winch tray for a Warn Zeon up to 12,000 lb, and mounts for two 3 x 3 cubed lights on each side. The removable inserts let owners customize the look of the grille section. The winch tray is 3/16 steel, and the bumper is made in the USA. It is built around a grille and sensor-compatible winch bumper in one piece, and the design is meant to set the HD Silverado apart. The design follows the patented Truck Grumper concept.

Key features

  • Combines grille and bumper
  • 13-piece modular, customizable design
  • Integrated sensor hole cutouts
  • Mounts for two 3 x 3 cubed lights per side
  • Built for a Warn Zeon winch up to 12,000 lb (tested only with Warn Zeon)
  • Bolt-on with stainless steel hardware and frame brackets
  • 2-stage matte black powder coat
  • 11-gauge U.S. steel with 3/16 steel winch tray

Heavy duty front end care

Heavy duty trucks carry more weight at the front, and a winch bumper adds to that load. Check the bumper mounts and frame brackets after rough trips, since the bumper can shift under a hard pull. Keep an eye on the grille section too, because its inserts and cutouts can work loose over time.

Owners who add cube lights should plan the wiring before mounting them. Route the harness away from sensors and moving parts, and use a relay so the lights do not draw directly from the factory circuits. Clean the sensor faces and lenses regularly so the system reads correctly.

  • Check frame brackets after rough trips
  • Re-tighten inserts and cutouts over time
  • Clean sensor faces and lenses regularly

Specifications

Brand Fab Fours
Part number GR3000-1
UPC 5810115913
Position Front
Width Full
Material U.S. steel, 11 ga.; 3/16 steel winch tray
Finish 2-stage matte black powder coat
Hardware Stainless steel
Winch rating Up to 12,000 lb (Warn Zeon)
D-ring mounts Included
Winch mount Included
Light mounts Included
Fit type Direct fit

Vehicle fitment

It fits the 2017–2018 Chevrolet Silverado 2500 HD and 3500 HD.

It is for heavy-duty Silverado trucks only, not the Silverado 1500. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Installation is a bolt-on using the stainless steel hardware and brackets supplied, which tie directly to the frame.

What’s included

  • Full-width truck Grumper
  • Stainless steel hardware and brackets
  • D-ring mounts, winch mount and light mounts

Not included: Cubed lights (not included) and the winch.

SKU: FFIGR3000-1 Category:

Specification

Shipping weight 379.00 lbs
Package dimensions 88.00 × 42.00 × 26.00 in
brands

Fitment

VehicleYearsTrims
Chevrolet Silverado 2500 HD2017–2018High Country, LT, LTZ, WT
Chevrolet Silverado 3500 HD2017–2018High Country, LT, LTZ, WT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the GR3000-1 fit a Silverado 1500?

No. The GR3000-1 fits the Silverado 2500 HD and 3500 HD heavy-duty trucks, not the lighter Silverado 1500, so owners of a 1500 will need a different Fab Fours bumper.

Can I mount cube lights on the GR3000-1?

Yes. The bumper has mounts on each side for two 3 x 3 cubed lights, but the lights are not included.

How big a winch will the GR3000-1 take?

It is engineered for a Warn Zeon winch up to 12,000 lb and has only been tested with the Warn Zeon.

Do the cube lights need a separate switch?

A separate switch is a common choice. It keeps the lights off the factory circuits and lets you run them only when needed. Use a fuse close to the battery and check local rules before using auxiliary lights on public roads.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon