Overview
The Fab Fours Vengeance Front Pre-Runner Bumper in black, part number CS14-D3052-1, is a non-winch steel front bumper with a black powder coat. The Vengeance Series front bumper is sensor compatible, and its sensors are optimized for vehicles with suspension lifts.
Stock height trucks may require tuning the sensor mount and will require special care. The bumper has a center spot for a 20 inch LED light bar and side mounts for 2×2 Dually lights.
The Vengeance Series is a light weight, premium steel, non-winch sensor bumper with a sleek finish. This part carries the Pre-Runner name and comes with a no guard or Pre-Runner guard option. Because the sensors are set for lifted trucks, a stock height truck needs extra care when the sensor mount is set up. A Rigid Industries 20 inch LED light bar fits the center, and the sides take 2×2 Dually lights.
Key features
- Pre-Runner front bumper without a winch
- Sensor compatible
- Sensors optimized for vehicles with suspension lifts
- Space for a 20 inch LED light bar in the center
- Side mounting for two 2×2 Dually lights
- Lower cutout for airflow to intercoolers
- Black powder coat finish
- Complete bolt-on with brackets that tie to the frame
Sensors and lifted trucks
Parking sensors work by reading distance through the bumper face, so their position and aim matter. On a lifted truck, the sensors sit at a different height and angle than on a stock truck, which changes detection range. After mounting, test the sensors on a flat surface and adjust them until the readings are steady.
Lift height also changes the approach angle and how the bumper clears obstacles. A bumper set up for a lifted truck may sit higher than expected, so measure clearance before heading onto steep ground. Keep wiring loops clear of the suspension travel and check that brackets stay tight after rough use.
- Test sensor readings on level ground
- Recheck sensor aim after any lift change
- Measure bumper clearance before steep trails
- Inspect wiring clips after each trail trip
Specifications
| Brand | Fab Fours |
|---|---|
| Series | Vengeance Series |
| Part number | CS14-D3052-1 |
| UPC | 5810110659 |
| Part type | Front Pre-Runner bumper |
| Material | Steel |
| Finish | Black powder coat |
| Sensors | Compatible; optimized for lifted vehicles |
| Winch mount | Not included |
| D-ring mounts | Not included |
| Fit style | Direct fit |
Vehicle fitment
Fab Fours lists CS14-D3052-1 as direct fit, with no vehicle year or model stated.
The CS14 prefix is not a stated vehicle, so confirm the truck application with Fab Fours. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A stock height truck may need the sensor mount tuned, and it will need careful setup. Make sure the fit matches your vehicle’s year, model and trim before you order.
What’s included
- Vengeance Pre-Runner front bumper
- Mounting brackets that tie to the frame
Not included: the 20 inch LED light bar.
