Overview
The Fab Fours Front Bumper with Pre-Runner Guard and Sensor in black, part number CH14-C3052-1, is a premium steel winch bumper for the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD. It adds a pre-runner guard to the sensor-ready design of CH14-C3051-1.
Four sensor holes are laser cut into the center section in the factory pattern, so factory-equipped sensors fit the OEM housing and work with the factory park assist system. The winch tray has an upgraded D-ring and fairlead location. The bumper is part of the premium line and is made in the USA.
Key features
- Pre-runner guard winch bumper with four integrated sensor holes
- Sensor holes laser cut with the factory pattern
- Redesigned internal winch tray with an upgraded D-ring and fairlead location
- Tray access slots for the factory sensor harness
- Winch ready for winches up to 16,500 lb
- Combination of 1/4 inch and 3/16 inch steel, 1/4 inch boxed mounting system
- 3/4 inch D-ring mounts, 90mm fog lights and 60mm turn indicator lights
- Two-stage matte black powder coat; bare steel uses -B instead of -1
Choosing a winch setup
A winch bumper carries the load of a recovery at the front of the truck, so the mounting points and the winch tray take most of the stress. Before a pull, confirm the winch is bolted through the tray and that the cable runs straight through the fairlead. An angled pull can bind the cable and load the bumper edges unevenly. Keep bystanders clear of the cable path at all times.
A pre-runner guard protects the front end from brush and rock contact while the winch stays behind it. Re-check the bumper and winch mount bolts after the first few trail runs, since vibration can loosen fasteners. Spool the cable evenly and inspect it for frayed strands before each use.
- Check winch mount bolts after the first trail runs
- Inspect cable and hook before every recovery
- Confirm the battery can handle winch draw
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CH14-C3052-1 |
| UPC | 5810109448 |
| Product type | Sensor winch front bumper |
| Guard style | Pre-runner guard |
| Position | Front |
| Width | Full |
| Material | Steel, 1/4 inch and 3/16 inch |
| Finish | Two-stage matte black powder coat |
| Sensor holes | 4, laser cut in the factory pattern |
| Maximum winch | 16,500 lb |
| Included lights | 90mm fog and 60mm turn indicator |
| Light mounts | Included |
| Winch mount | Included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD.
Other Silverado years are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lower portion of the winch tray has access slots so the factory sensor harness can pass through. The adjustable boxed mounting system and the supplied lights both need attention during installation.
What’s included
The pre-runner guard sensor bumper with winch mount and the 90mm fog lights and 60mm turn indicator lights.
Not included: The winch.
















