Overview
The Fab Fours Elite Front Bumper with Pre-Runner Guard, part number TT14-R2862-1, is a matte black powder-coated pipe and smooth plate bumper for the 2014–2018 Toyota Tundra.
The Elite bumper is made in South Carolina and has no grill mesh. Its matte black powder coat sits over combined pipe and smooth plate steel, with no vertical flanges, matched to the body lines of the truck. D-ring mounts are included, and the winch mount is an optional bolt-on part.
Key features
- Pre-runner guard
- Combination pipe and smooth plate construction
- Bolt-on tow hooks included
- Light mounts for factory fog lights
- OE Styles ELITE badge included
- Optional bolt-on winch mount for winches up to 12,000 lb or smaller
- Optional bolt-on 1 inch D-ring mounts
Choosing a front bumper setup
A pre-runner guard protects the lower front of the truck, but its shape changes how the vehicle handles obstacles. The smooth plate panels help shed brush and resist snagging, while the pipe sections give a place to hold onto when the truck noses into a slope. Before choosing between a bare bumper and one with a winch mount, consider how much weight the front will carry and whether the stock front suspension can handle the added load.
If a winch will be added later, plan the bolt-on winch mount and the electrical feed at the same time. The mount and tow hooks share the front recovery load, so both should be checked after each trail trip. Tighten the bolts, look for cracks at the welds and bends, and inspect the powder coat for chips that expose bare steel. Clean dirt from the mounting area so corrosion does not build up under the bumper.
- Check bolt tightness after the first few trail runs
- Look for cracked welds at the tow hook mounts
- Touch up chips in the matte finish
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TT14-R2862-1 |
| UPC | 5810108724 |
| Position | Front |
| Width | Full |
| Material | Steel |
| Construction | Combination pipe and smooth plate |
| Finish | 2-stage matte black powder coat |
| Guard | Pre-runner guard |
| Tow hooks | Bolt-on, included |
| Badge | OE Styles ELITE badge included |
| Winch mount | Optional bolt-on, up to 12,000 lb or smaller |
| D-ring mounts | Included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2014–2018 Toyota Tundra in 1794 Edition, Limited, Platinum, SR, SR5 and TRD Pro trims.
It is for the 2014–2018 Tundra and does not fit the 2007–2013 generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The optional winch mount and 1 inch D-ring mounts bolt on, so no welding is described.
What’s included
- Elite front bumper with pre-runner guard
- Bolt-on tow hooks
- OE Styles ELITE badge
- Light mounts for factory fog lights
Not included: A winch and the optional bolt-on winch mount.
















