Overview
The Pro Comp Suspension ES3000 322500 is a rear hydraulic shock absorber with loop mounts at both ends. It measures 22.58 in extended and 13.71 in collapsed, with 8.87 in of travel. Pro Comp rates it for 0 in. of lift or drop, so the shock suits a rear suspension at its factory height. This part number is not tied to a named vehicle.
The shock is built around a twin tube cellular gas body with 10-stage velocity-sensitive valving. Its 5/8 inch chrome-hardened piston rod and Teflon rebound stop are meant for comfortable highway driving and demanding conditions, and the double welded shock mounts add strength. The finish is white, and the shock carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Rear position, rated for 0 in. lift or drop
- Pro Comp Suspension limited lifetime warranty
Matching a replacement shock
Without a named vehicle, the most reliable match comes from the old shock itself. Measure its eye-to-eye length fully compressed and fully extended, note the stroke, and check the mount style at each end. Loop mounts, stem mounts and eye mounts are not interchangeable without adapters, so the mount type matters as much as the length.
Rubber bushings and mount hardware should be inspected whenever a shock is replaced. Cracked rubber, rust on the bolts and bent brackets all change how the shock sits in the suspension. Clean the threads, replace damaged hardware and check that the shock moves freely through its full range before finishing the job.
- Measure the old shock compressed and extended
- Compare the mount style at both ends
- Replace cracked bushings and rusted bolts
- Recheck fasteners after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 322500 |
| UPC | 614901041538 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 22.58 in |
| Collapsed length | 13.71 in |
| Travel length | 8.87 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Lift height rating | 0 in. lift or drop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It has no named make, model or years. Verify year, model and trim against your vehicle before buying. Match the 22.58 in extended length, 13.71 in collapsed length and loop mounts against the rear shock on your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 322500.
Not included: the dust boot.





















