Overview
The Pro Comp ES3000 Series shock absorber, part number 336010, is a factory-mount shock with vehicle-specific lengths. Confirm fit for your vehicle’s year, model and trim before ordering, and compare it against the original shock.
It is a twin-tube, gas-charged design with 10-stage velocity-sensitive valving and a 5/8 inch chrome-hardened piston rod. The Teflon rebound stop controls the return stroke, so the shock settles without a sharp rebound after a bump.
The 336010 uses factory mounts and a 5/8 inch chrome-hardened piston rod, so the main fit check is the length and mounting point of the shock you are replacing.
Key features
- 10-stage velocity-sensitive valving.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded shock mounts.
- Pro Comp Suspension offers a limited lifetime warranty.
Damping and the return stroke
Damping controls how quickly a suspension moves after a bump, and shocks handle that work in both directions. Compression resists the wheel moving up, while rebound resists the return. A rebound stop limits how far the shock extends at the end of its return stroke, which helps prevent harsh snap after a jolt.
Changes in tire size, load and spring rate all affect how the damping feels, even when the shock is correct. Inspect rebound stops and bushings when the shock is replaced, since a worn stop can change how the vehicle settles. A shock that feels floaty or bouncy may need replacing rather than adjusting.
- Compression resists wheel movement up
- Rebound resists the return stroke
- Inspect rebound stops during replacement
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 336010 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the length and mounts of the shock you are replacing.
Because the lengths are vehicle specific, a matching part number is not proof of fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the old shock between its mounts, then compare that figure with the vehicle-specific lengths before removing it.
What’s included
One ES3000 shock absorber.
Not included: a dust boot, which is not part of the purchase.








