Overview
The ES6000 twin-tube shock, part number 622504, is sold under the ES6000 series with factory upper and lower mounts. Its extended, collapsed and travel lengths are vehicle specific, so check the length and mounting style against the shock you are replacing before buying.
The twin-tube design is intended for comfort on the road and control off road. The 10-stage velocity-sensitive valving adjusts to changing road conditions, and the 5/8 inch chrome-hardened piston rod works with a teflon rebound stop. The shock is gas charged and non-adjustable.
Key features
- 10-stage velocity-sensitive valving that adjusts to road conditions.
- A 5/8 inch chrome-hardened piston rod.
- A teflon rebound stop for a comfortable highway ride.
- Double-welded shock mounts.
- Gas-charged design.
Measuring before installing
Shock length and mount style decide whether a shock fits a given truck, and the lengths for this part are vehicle specific. Measure the original shock from the center of one mount to the center of the other, then compare the collapsed and extended figures before buying. A new shock that is too long can bind at full compression, and one that is too short can run out of travel.
Gas-charged shocks keep damping steady over repeated cycles, which helps on long highway runs and rough trails alike. Check the rebound stop and piston rod for damage at each service, and look for oil on the body. Worn bushings and loose mounts can make a new shock feel harsh, so inspect those during installation.
- Measure center to center before buying
- Check clearance at full compression
- Inspect the piston rod for pitting or bends
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 622504 |
| UPC | 614901234831 |
| Shock series | ES6000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Body type | Gas charged |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check the mounts against your original shock.
A universal-fit description does not confirm that a shock will bolt into a given truck, because the lengths and mounts are vehicle specific. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the original shock between its mounts and compare it with the vehicle-specific lengths before ordering, then check clearance at full compression.
What’s included
One ES6000 shock absorber, sold as each.
Not included: a dust boot. None is included with the shock.






















