Overview
The Rigid Industries E2-Series LED Light Bar is a 20-inch light bar rated at 150 watts, with 48 white LEDs. It uses patented Specter optics for a Hyperspot/Driving beam, and it is a universal fit light with a single bracket mount.
The build includes a durable polycarbonate lens, integrated thermal management and a GORE pressure equalizing vent. The LED lifespan is listed at 50000 hours, and the light is engineered and assembled in the USA.
Key features
- Patented Specter optics with instant on and off
- No warm-up period before use
- Over and under voltage protection
- Integrated thermal management and a GORE pressure equalizing vent
- Durable polycarbonate lens and 50000-hour LED lifespan
Mounting a long light bar
A 20-inch bar puts real leverage on its mount, so the bracket is the point that takes road vibration. Choose a solid, flat surface with no flex, such as a stout bumper or a roof rack bolted to the frame. Hold the bar in position before drilling and confirm the beam will clear the hood, the windshield frame and any tow hardware at full suspension travel.
The wire is the other half of the job. Run the feed from the battery through an inline fuse and a relay so the switch only carries a small load. Keep the harness away from moving suspension parts and sharp edges, and use grommets wherever it passes through sheet metal. Tighten the bracket after the wire is set, then recheck every fastener after the first few trail outings.
- Check the mounting surface for flex before drilling
- Confirm beam clearance at full suspension travel
- Re-check bracket bolts after the first trail runs
Specifications
| Brand | Rigid Industries |
|---|---|
| Series | E2-Series |
| Length | 20 in. |
| Beam | Specter Hyperspot/Driving (Driving/Spot) |
| Power | 150 Watts |
| LEDs | 48 white LEDs |
| Lens color | Clear |
| Lens material | Durable polycarbonate |
| Light type | LED |
| LED lifespan | 50000 hours |
| Mounting | Bracket, single |
| Finish | Black |
| Compliance | RoHS compliant |
| UPC | 849774029011 |
Vehicle fitment
It is a universal fit light, so it is not made for one vehicle. Its single bracket needs room for the 20-inch housing and a clear path for the wire. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Mount the bar with its single bracket and route the power wire before final tightening. Wire the light through a fused relay, and check local rules for driving lights before using it on public roads.
What’s included
It is sold as a single 20-inch light bar with a single bracket mount. A relay, harness and switch are not included, so source those separately if needed.









