Overview
The Rigid Industries Radiance Curve Plus 40 in. light bar, part 34004, is a 40-inch LED light bar with amber backlighting for off-road and driving lighting. It is universal fit, not built for a specific make or model, so you mount it with the included black powder coated brackets wherever your vehicle has room for it.
The Radiance Curve Plus uses the same high-grade aluminum alloy housing as Rigid’s E-Series bars, but its optics and circuitry differ. A black exposed circuit board feeds Broad Spot optics that combine the reach of a spot with the width of a flood. It is rated at 4,752 raw lumens for the 10 size, and the Radiance line comes in lengths from 20 to 54 inches.
Key features
- High-grade aluminum alloy housing and heatsink with an integrated thermal management system
- Broad Spot optics combining spot and flood beam patterns
- Amber back-lighting, with a dedicated wire to run the back-lights without the primary LEDs
- IP68 rated for dust and water ingress; SAE J575 compliant for shock and vibration
- Impact resistant polycarbonate lens with a GORE pressure equalizing vent
- Over and under voltage protection, reverse polarity protection and RFI/EMI protection
- Black exposed circuit board and black powder coated mounting brackets
- RoHS compliant, with patent-pending technology
Amber backlight wiring
The amber backlighting works best on its own dedicated wire. Running that wire separately from the main LEDs means the backlights can be switched on by themselves for parking or camp use, and the main lights stay off when you do not need them. Keep the backlight run away from hot exhaust parts and sharp edges, and secure it with clips along the way.
Protect the feed with a fuse close to the battery, and use a switch or relay so the bar can be shut off from the cab. Before connecting, confirm the vehicle’s electrical system sits within the 10-15 V DC range the bar is rated for. A quick voltage check at the battery prevents surprises later.
- Route the backlight wire separately from the main power run
- Fuse the feed close to the battery
- Use a relay so the bar can be switched from the cab
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 34004 |
| UPC | 849774016424 |
| Size | 40 in. light bar |
| Backlighting | Amber |
| Input voltage | 10-15 V DC |
| Lifespan | 50,000+ hours |
| Raw lumens | 4,752 (10 size) |
| Operating temperature | -40 ºF to +145 ºF (-40 ºC to +60 ºC) |
| Ingress rating | IP68 |
| Lens | Impact resistant polycarbonate |
| Housing and heatsink | High-grade aluminum alloy |
| Finish | UV polyester powder coat |
| Mounting brackets | Black powder coated, included |
| Wiring harness | Included with some packages, and also offered separately |
Vehicle fitment
It is universal fit, so it is not tied to a specific vehicle. Choose a mounting position that clears your bumper, roof rack or hood and leaves a clean path for the wiring.
Installation notes
Run the power feed through a fuse and a switch or relay, and keep the amber back-lighting on its own dedicated wire if you want it to work without the main LEDs. Auxiliary lights are subject to state road-use rules, so confirm where the bar may be mounted and lit before driving with it.
What’s included
Mounting brackets come in the box. Check whether the multi-switch wiring harness is in your package, since it may also be sold separately.
Not included: The multi-switch wiring harness, if it is sold separately as one line states.









