Overview
The SR2-Series single row LED light bar, part number 911313, is a 10 inch low profile LED light bar for vehicles and equipment where mounting space is limited. It belongs to the SR-Series PRO line, with one row of LEDs and a choice of Hybrid or patented Specter optics. It is a universal fit, so it is not tied to one year, make or model.
The light is designed to project light at extreme distances while consuming very little power. It suits off-road vehicles as well as industrial, agricultural and marine applications. Because it serves many uses, check that its size and bracket mount suit your planned location before ordering.
Key features
- Single row of LEDs in a low profile housing that Rigid Industries describes as sleek.
- Up to 111% more raw lumens, which Rigid Industries attributes to improved LED technology.
- Hybrid or patented Specter optics, available in a variety of beam patterns.
- Extruded aluminum housing with a durable black or white powder coated finish.
- Blacked-out circuit boards for a more refined look.
- Available in a range of lengths and configurations; this part is listed at 10 inches.
Planning the bracket mount
A bracket-mounted bar depends on its base. Pick a flat, solid surface such as a roof rack crossbar, a bumper plate or a utility rail, and make sure it can handle the bar’s weight and vibration. Test the position with the bar held in place before drilling, and leave clearance for the cable exit.
Compact bars can sit in corners where other lights will not fit. Check that the bar does not block airflow to a radiator or intake, and keep it clear of hood and door movement. Off-road use puts the mount under shock, so tighten fasteners and inspect them regularly.
Wiring is often the weak point. Use a fused relay, keep the switch on the dash, and secure the harness with clips so it does not rub. Replace the seal or gasket if water gets in, since moisture inside the housing will damage the circuit boards.
- Confirm the surface is flat and solid
- Leave room for the cable exit
- Inspect fasteners after rough trails
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 911313 |
| UPC | 849774029851 |
| Product line | SR2-Series single row LED light bar (SR-Series PRO per brand copy) |
| Light source | LED |
| Bulb type | LED |
| Lens color | Clear |
| Size | 10 inch |
| Type | Light bar |
| Mounting type | Bracket |
| Optics | Hybrid or Specter |
| Housing | Extruded aluminum |
| Finish | Black or white powder coated |
| Light output | Up to 111% more raw lumens |
| Sold as | Kit |
Vehicle fitment
It is a universal fit and is not built for a specific vehicle year, make or model. It can mount on off-road vehicles and on industrial, agricultural or marine equipment, provided the 10 inch bar and its bracket suit the location.
Because no specific vehicle is listed, do not assume a particular model fits without checking the mounting space. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The light bar uses bracket mounting, so confirm the bracket position before fitting. Wire it through a fuse and relay rather than directly to the battery, and check local rules before using driving lights on public roads.
What’s included
Sold as a kit with bracket mounting. Check the box for the included parts.
Not included: Check the wiring, switch and relay in your kit before ordering or installing.









