Overview
The Rigid Industries Radiance Backlight is a 50-inch surface mount LED light bar with a black aluminum housing and a white lens. It is a universal-fit lighting product, so it is not built for a single vehicle model, and fit depends on your mounting location and wiring.
The housing uses E-Series construction for durability, with high-grade aluminum alloy, a heat sink and a black powder coat. Two Rigid branding plates carry backlighting, which is available in white, green, red and blue.
Key features
- Surface mount 50-inch light bar housing
- High-grade aluminum alloy housing with a heat sink
- Black powder coat finish
- Exposed printed circuit board design
- Two Rigid branding plates with backlighting
- Backlighting available in white, green, red and blue
- LED bulb type with a white lens
Clearance and cable routing
A 50-inch bar needs clear space both behind and in front of the housing. Before drilling or clamping anything, hold the bar in position and check that the lens will not strike a hood edge, a roof rail or a spare tire when the vehicle moves. Plan the cable route at the same time, keeping slack at each bend so the wiring can move with the mount without pulling loose.
Aluminum housings handle heat well, but the wiring and fuse holders need to stay dry and secure. Use sealed connectors where the cable leaves the vehicle body, and add drip loops so water runs away from the joints. A quick check after the first few trips will catch loose clamps before they cause a problem.
- Test-fit the bar before drilling
- Leave slack at every bend in the cable
- Use sealed connectors and drip loops
Specifications
| Brand | Rigid Industries |
|---|---|
| Product | Radiance Backlight |
| UPC | 849774028809 |
| Light shape | Light bar |
| Mounting type | Surface mount |
| Length of housing | 50 inches |
| Lens color | White |
| Bulb type | LED |
| Housing material | High-grade aluminum alloy with heat sink |
| Finish | Black powder coat |
| Sold as | Single |
| Bracket | Single |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit light bar, so it is not built for a single vehicle model. No make, model or year applies to it.
Because the bar is 50 inches long, measure your bumper, roof or mounting area for clearance before installing. Check the mounting space and clearance on your own vehicle.
Installation notes
Mount the single bracket to a clear, sturdy surface with enough room for the full 50-inch housing. Light bars need fused relay wiring, and local road-use rules govern where a light bar may be used on public roads.
What’s included
The product is sold as a single unit with one bracket.
Not included: A wiring harness, relay and fuse are needed to power the light bar. Plan to source them before installation.









