Select your vehicle

DrawTite Class V Ball Mount (Zink) – 4285

DrawTite

Shop DrawTite Trailer Hitch Ball Mounts on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • DrawTite 4285 Class V ball mount with Zink finish
  • 4 inch drop and 2 inch x 2 inch shank
  • 1.250 inch ball hole in steel construction
  • Universal fit; compatibility depends on receiver size and rating
  • UPC 742512042856

Description

Overview

The DrawTite 4285 is a Class V ball mount with a 4 inch drop, a 2 inch by 2 inch shank and a 1.250 inch ball hole. It is made of steel with a Zink finish and is a universal fit.

Matching the drop to your towing height matters, and the weight rating should be checked before the mount goes on.

Key features

  • Class V rating
  • 4 inch drop
  • 2 inch x 2 inch shank
  • 1.250 inch ball hole
  • Steel construction
  • Zink finish
  • Universal fit with no specific make, model or year

Choosing a drop height

Ball height is the first thing to get right with a drop mount. A 4 inch drop lowers the ball well below the receiver, so the trailer coupler should sit close to level when the rig is loaded. Park on flat ground, hitch up, and measure from the ground to the bottom of the coupler and to the top of the ball. Small differences add up, and a mismatch shows up as sway or bottoming out on dips.

Steel Class V mounts are often paired with a sway control bar or a weight distribution hitch on heavier trailers, and those accessories need to match the receiver and ball size. Inspect the shank for cracks at the welds and check the ball nut before each season. Replace a bent or cracked mount rather than straightening it.

  • Check the ball nut tightness before each trip
  • Look for rust or cracks at the welds
  • Match the ball diameter to the coupler

Specifications

Brand DrawTite
Part number 4285
UPC 742512042856
Class Class V
Drop 4 inch
Shank size 2 inches x 2 inches
Ball hole 1.250 inches
Material Steel
Finish Zink

Vehicle fitment

It is a universal fit mount, so no make, model or year is tied to it. Confirm the Class V rating and 2 inch by 2 inch shank suit your receiver before installing it.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Measure trailer height with the mount fitted, since a 4 inch drop changes the ball height noticeably.

What’s included

Accessories beyond the mount are not part of this item. Not included: a hitch ball and a hitch receiver.

SKU: DRA4285 Category:

Specification

Shipping weight 20.00 lbs
Package dimensions 16.90 × 5.50 × 3.00 in
brands

Questions & Answers

What drop does the DrawTite 4285 have?

The DrawTite 4285 has a 4 inch drop. It is a Class V steel ball mount with a 2 inch by 2 inch shank and a 1.250 inch ball hole, finished in Zink.

What is the DrawTite 4285 part number?

The part number is 4285 and the UPC is 742512042856. Steel construction and the Zink finish help identify this exact mount.

Does the DrawTite 4285 fit a specific vehicle?

It is a universal fit mount, with no make, model or year tied to it. Check the receiver size and the Class V rating against your tow vehicle before use.

How often should I inspect a Class V hitch?

Look at the mount before each season of towing and after any heavy trip. Check the welds, the shank and the ball nut for cracks, rust or looseness. Tighten fasteners as needed, and replace the mount if it is bent.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop DrawTite Trailer Hitch Ball Mounts on Amazon