Overview
The DrawTite 40343 is a Class III/IV quick loading ball mount with a black finish. It fits a 2 inch receiver, has a 1 inch ball hole, and is rated for 6000 lbs. GTW and 600 lbs. tongue weight.
The angle cut guides the mount into the receiver, and it also reduces weight, which makes loading easier.
Key features
- Quick loading design with an angle cut
- Class III/IV rating
- 6000 lbs. GTW and 600 lbs. tongue weight
- 2 in. receiver
- 1 in. ball hole
- 2 in. drop and 0.75 in. rise
- Black steel construction
Choosing a quick loading mount
A ball mount carries the trailer’s tongue load into the tow vehicle’s receiver, so the mount is the link that every towing decision depends on. A quick loading style keeps that link easy to install and remove. Angled shapes help the shank slide into the receiver without forcing it, which matters when a trailer is hooked up alone or in poor light.
When choosing a mount, compare the receiver size, the ball hole size and the drop height against the trailer coupler and the ball you already own. The drop should leave the trailer level when loaded. Pair the mount with a hitch pin and clip that match the receiver, because a loose pin is one of the most common towing problems.
- Check receiver wear and rust before each trip
- Re-tighten the ball nut after the first few miles
- Inspect the welds and finish for cracks or chips
Specifications
| Brand | DrawTite |
|---|---|
| Model | 40343 |
| UPC | 742512403435 |
| Class | Class III/IV |
| Gross trailer weight | 6000 lbs. GTW |
| Tongue weight | 600 lbs. |
| Receiver size | 2 in. |
| Ball hole | 1 in. |
| Length | 10.5 in. |
| Drop | 2 in. |
| Rise | 0.75 in. |
| Shank size | 2 inches x 2 inches |
| Material | Steel |
| Finish | Black |
| Packaging | Bulk |
Vehicle fitment
It is a universal fit mount, so it is not tied to one vehicle. Its 2 in. receiver size must match your hitch.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The angle cut helps the mount slide into the receiver. Check the 6000 lbs. GTW and 600 lbs. tongue weight ratings against your trailer before towing.
What’s included
The mount ships in bulk packaging only. Not included: a hitch ball and a hitch receiver.






















