Overview
Part number 82213548 is a Jeep ball mount adapter with a 1 inch steel shank, an adjustable drop and a chrome finish. It is a universal fit rather than one made for a single model year.
Rated tow capacity and hitch type depend on the vehicle, so the Owner’s Manual is the reference for what your rig can pull.
Key features
- Adjustable drop or rise
- Chrome finish over steel
- 1 inch shank
- Universal fit per Jeep’s listing
Test-fit and load checks
Adjustable drop hitches let you match the ball to a trailer coupler, but each change in height moves weight onto the receiver. Set the trailer level first, then move the ball only as far as the coupler requires. A balanced setup keeps tongue weight steady and reduces sway at highway speeds. Once the height is set, tighten the hitch nut and bolts to the torque in the owner’s manual before each trip.
Chrome plating on steel adapters can be rinsed after road salt or mud exposure to keep grit from wearing the surface. Look over the shank each season for flaking, pitting or bends, since damage where the shank enters the receiver can weaken the connection. If there is any play inside the receiver, replace the adapter before towing. Keep the hitch pin and clip in a dry spot so they are ready for the next hookup.
Specifications
| Brand | Jeep |
|---|---|
| Part number | 82213548 |
| Drop or rise | Adjustable |
| Shank size | 1 inch |
| Finish | Chrome |
| Material | Steel |
| Fitment | Universal Fit |
Vehicle fitment
No specific vehicle is assigned to this adapter because it is a universal fit. Check your vehicle’s hitch requirements in the owner’s manual before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the adapter in your receiver before loading a trailer.
What’s included
Confirm the included items on arrival before starting the install.
Not included: hitch ball.









