Overview
The DrawTite 40332 is a Class V forged ball mount in black. It has a 2 inch drop, a 2 inch by 2 inch shank and a 1 inch ball hole, and it is made of steel. It is a universal fit mount.
Using a ball mount at the correct height is important for safe towing, so check its weight rating before each trip.
Key features
- Class V rating
- Forged construction
- 2 inch drop
- 2 inches x 2 inches shank
- 1 inch ball hole
- Black finish
- Steel material
Matching the mount to your trailer
A Class V mount is built for heavier trailers, so the rating matters more than the look of the hardware. Check the trailer’s gross weight and tongue weight against the mount before you hitch up. A forged body is designed to resist bending under load, but it still needs a correct hitch height to keep the trailer level and the brakes working as intended.
Match the shank to the receiver and the ball to the coupler. A ball that is too small for the coupler can lift off under load, and a loose shank can wear the receiver. Keep the trailer’s weight distributed evenly so the tongue load stays within the rating. If the trailer sits higher or lower than the tow vehicle, a drop or rise can correct the angle, but that choice should be made with the rating in mind.
- Inspect the ball and nut for wear before each trip
- Keep the shank pin and clip in place
- Look for cracks or flaking paint at the welds
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 40332 |
| UPC | 742512403329 |
| Class | Class V |
| Construction | Forged |
| Drop | 2 inch |
| Shank size | 2 inches x 2 inches |
| Ball hole | 1 inch |
| Material | Steel |
| Finish | Black |
Vehicle fitment
It is a universal fit mount, so no specific vehicle is tied to it. Confirm the Class V rating and 2 inch receiver against your tow vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the weight rating against your trailer before towing, and confirm the 2 inch receiver matches the shank.
What’s included
No accessories are included with the mount. Not included: a hitch ball sized for the 1 inch ball hole.









