Overview
The Detroit Locker 913A541 is a TrueTrac limited slip differential named for the Toyota Tacoma rear axle, with 30 splines. No model years are given, so fitment has to be confirmed by axle size and spline count.
The unit is all gear driven and clutchless. When one rear tire spins, drive moves across to the tire with grip, and the design has no clutch plates to wear out.
Key features
- All gear driven, clutchless limited slip
- Sends drive to the tire with traction
- No clutch plates in the design
- Toyota Tacoma rear axle, 30 splines
- Single limited slip assembly
Tacoma rear axle use
On a pickup like the Tacoma, a rear limited slip helps move power when one tire lifts or slips on loose surfaces. Gear-driven units keep working without clutch packs, so the feel stays steady over time. Most drivers notice the difference on wet pavement, gravel and dirt climbs where one side loses grip. Load and tire choice both affect how often the rear end gets stressed.
Gear mesh and pinion preload are the first things to check after any carrier work. Tire pressure and matched tread depth also reduce unwanted load on the gearing. A shop with differential experience can confirm the pattern before the truck returns to regular use, and a short test drive helps catch early noise.
- Watch for whine under light acceleration
- Check the rear fluid at each oil change
- Note any clunk on tight turns
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 913A541 |
| UPC | 700003181621 |
| Manufacturer | Eaton |
| Differential type | Limited slip assembly, all gear driven |
| Axle location | Rear |
| Axle type | Toyota Tacoma |
| Axle manufacturer | Toyota |
| Axle spline count | 30 splines |
Vehicle fitment
No model years are given for the Toyota Tacoma rear axle. Confirm the axle size and 30-spline count against your current differential before ordering, since only the Tacoma name is given.
It is identified for the Toyota Tacoma rear axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitting a limited slip carrier means setting gear mesh and bearing preload, so a qualified differential shop is the right choice for this install. Secure the vehicle on stands before starting.
What’s included
Check the package contents against your installation before starting, including bearings, shims and carrier bolts.






