Overview
The Detroit Locker 912A654 is a TrueTrac limited slip differential for GM 10 bolt 8.0-inch rear axles made by American Axle Manufacturing (AAM), with 28 axle splines. Detroit Locker identifies it as a complete limited slip assembly under Eaton part number EAT912A654.
The TrueTrac is all gear driven and clutchless. When one rear wheel loses grip, torque moves across to the wheel that still has traction, which helps a vehicle drive out of a stuck spot. With no clutch packs, there are no clutches to wear out.
Key features
- All gear driven, clutchless limited slip design
- Moves power from the slipping wheel to the wheel with traction
- No clutch packs to wear out.
- Built for GM 10 bolt 8.0-inch rear axles with 28 splines
- Complete limited slip differential assembly
Matching the axle
Axle size and maker both matter for a GM 10 bolt carrier. The 8.0-inch housing from American Axle Manufacturing should be confirmed against the axle before ordering, since the spline count alone does not identify a housing.
A complete assembly replaces the open carrier in one piece, so the old carrier is removed and the housing is prepared for the new unit. Clean the housing and check the carrier bore for damage. Set the bearing preload and the ring and pinion backlash before reinstalling the cover, and check tooth contact with the vehicle supported.
Gear driven units are often chosen for consistent traction without clutch packs to adjust. Lubricant type and change intervals still matter, so follow the service procedure for the axle after installation. Inspect the seals and cover gasket on a regular schedule, and keep the vehicle fully supported on stands whenever the rear axle is open.
- Confirm the housing maker and 8.0-inch size
- Clean and inspect the carrier bore
- Check tooth contact before reinstalling the cover
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 912A654 |
| UPC | 70000523456 |
| Manufacturer | Eaton |
| Differential type | Limited slip assembly, all gear driven |
| Axle location | Rear |
| Axle type | GM 10 bolt 8.0 inches |
| Axle manufacturer | American Axle Manufacturing |
| Axle spline count | 28 splines |
Vehicle fitment
No specific vehicle years, makes or models are given for this unit. It is identified by axle: a GM 10 bolt 8.0-inch rear axle from American Axle Manufacturing with 28 splines. Check your housing and spline count against those figures before ordering.
A different spline count does not match this unit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A gear-type limited slip carrier needs ring and pinion backlash and bearing preload set correctly, so have it installed by a shop experienced with differentials. Keep the vehicle fully supported on stands while the rear axle is open.
What’s included
Check the package contents for bearings, shims, gaskets and hardware before installing.






