Overview
The Detroit TrueTrac 911A319 is a limited slip assembly for GM 7.5 inch 10 bolt rear axles with 26 splines and a 3.23 up ratio. The TrueTrac is an all gear driven, clutchless differential, so it moves power from a slipping wheel to the wheel with grip.
It has no clutch packs to wear out. Eaton part number 911A319 is the number to use when matching this unit to a GM 7.5 inch rear housing.
Key features
- All gear driven and clutchless design
- Moves power from a slipping wheel to the non-slipping wheel
- No clutches to wear out, per the maker
- 26 spline GM 7.5 inch 10 bolt design
- Rated for the 3.23 up ratio.
Choosing the right setup
A limited slip differential changes how torque is split between the two wheels of an axle. When one wheel lifts or sits on loose ground, an open carrier sends power to that wheel and the vehicle stalls. A gear driven unit moves torque to the wheel that still has grip, which helps on trails, in snow and on steep climbs. Because the action comes from the gears rather than friction packs, the behavior stays consistent as miles add up.
Choosing a carrier starts with the ring and pinion ratio. The gearing has to suit the vehicle’s transmission and tire size, so a 3.23 up setup should be compared with the gears already in the housing before any work begins. Ring and pinion gears are often replaced together with the carrier, and new bearings and shims are commonly needed to set preload and backlash correctly. Plan for a tooth contact check once the unit is installed.
- Measure the axle housing and spline count before buying
- Compare the ratio with the gears already in the carrier
- Plan to replace bearings and shims with the carrier
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 911A319 |
| UPC | 70000010079 |
| Manufacturer | Eaton |
| Axle manufacturer | GM |
| Axle type | GM 10 Bolt 7.5 Inches |
| Axle location | Rear |
| Axle spline count | 26 splines |
| Ratio listed | 3.23 Up |
| Differential type | Limited slip assembly |
Vehicle fitment
It is matched to GM 10 bolt 7.5 inch rear axles with 26 splines and a 3.23 up ratio. No vehicle years or chassis codes are given, so measure the housing and count the splines before ordering.
GM 10 bolt 7.5 inch names an axle family, not a vehicle, so check the housing and spline count yourself. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A limited slip assembly still changes how the carrier is set up, so professional installation and a break-in period are the right approach.
What’s included
The TrueTrac unit is the only item covered. Check the package contents against your installation before starting.






