Overview
The Detroit Locker 914A538 is a rear TrueTrac limited slip differential for GM 9.5 Inch 14 Bolt axles. Its gear-driven design has no clutch packs, so there are no clutches to replace, and it moves torque from a slipping wheel to the wheel with grip. Measure your axle shaft count before ordering, since 33 and 34 splines are both shown for this unit.
Eaton builds the TrueTrac under the Detroit Locker name. Part number 914A538 identifies this rear GM unit, and its UPC is 70000330823.
Key features
- Clutchless, gear-driven TrueTrac limited slip
- Automatic torque transfer between the rear wheels
- Designed for GM 14 Bolt 9.5 Inch rear axle types
- Spline count: 33 or 34, so measure your axle shafts before ordering
Setup and checks
A TrueTrac differential transfers torque through gears instead of clutch packs, so it avoids the clutch wear that eventually affects other limited slip designs. It still needs a healthy carrier, because gear mesh and preload control how smoothly it sends torque to the grippy wheel. A tire that has lost traction will still spin in a bind if the rest of the drivetrain is weak.
Because this is a rear GM 14 Bolt 9.5 Inch unit, the axle housing, shafts and bolt pattern must match before anything is cut or ordered. Measure the spline count directly on the shafts rather than relying on a single printed figure, and bring the carrier to a shop that can check backlash and bearing preload.
Routine care is light. Use a gear oil suited to a limited slip carrier, change it at the interval set for your vehicle, and listen for chatter during tight turns. Persistent chatter or a sudden change in behavior is a sign to have the carrier inspected rather than driven further.
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 914A538 |
| UPC | 70000330823 |
| Axle location | Rear |
| Axle type | GM 14 Bolt 9.5 Inches |
| Axle spline count | |
| Differential type | Limited slip assembly |
| Popular axle manufacturer | GM |
Vehicle fitment
Fitment depends on the axle, not a vehicle model. The axle type is GM 14 Bolt 9.5 Inches, so measure your axle shafts and compare the count against both 33 and 34 before choosing this unit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A limited slip carrier involves ring and pinion gear mesh and bearing preload, which calls for a shop with the right setup tools. Measure the axle spline count before the carrier is ordered.
What’s included
The package covers the TrueTrac assembly under part number 914A538. Check the included items against your installation before starting, including whether a ring gear, pinion or bearings are needed.






