Overview
The Daystar KC09121BK is a 2-inch lift that combines front coil spring spacers with Daystar Scorpion shocks at the front and rear. The rear has no spacer lift, so the rear height comes from the shocks and the factory springs. Daystar says its lift kits are designed to raise the vehicle without a metal-on-metal contact and with an easy installation.
Key features
- 2-inch lift with front coil spring spacers
- Daystar Scorpion shocks at the front and rear
- No metal-on-metal contact
- Black component finish
Choosing a front lift setup
A front spacer lift raises the front end by placing coil spring spacers between the spring seat and the body or upper mount, so the factory springs carry the same load at a higher position. Front ride height and rear ride height need to match or the truck will sit uneven and the steering geometry will change. When a front lift is added without a rear lift, the rear shocks and springs are the main factors that determine how level the truck looks.
Front-end components that often get replaced alongside a spacer kit include tie rod ends, drag link ends and sway bar end links, since the joints operate at a steeper angle after the lift. Inspect the front brake lines for stretch and check that the CV axle angles are not overly strained. Looking at boots and grease fittings during routine service helps catch wear early.
Specifications
| Brand | Daystar |
|---|---|
| Kit number | KC09121BK |
| UPC | 618089000080 |
| Lift height | 2 inches |
| Front lift | Coil spring spacers |
| Rear lift | None |
| Shocks | Daystar Scorpion, front and rear |
| Component finish | Black |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for this kit. Verify the vehicle year, model and trim against the application before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rear has no lift and the new shocks are included, the installer should check the rear ride height after fitting. A wheel alignment is commonly needed after front lifts, so check the vehicle’s alignment once the front spacers are installed.
What’s included
- Front coil spring spacers
- Daystar Scorpion shocks, front and rear









