Overview
The Dana Spicer spindle stud 37759-2 is a replacement stud for axle spindles and knuckles. It is purpose-made for this application and takes the place of improvised bolts welded to the knuckle, a practice to avoid.
Confirm the application before installing it, since vehicle years, makes and models are unknown from this part alone.
Key features
- It is sized to fit the application it is made for.
- Intended to replace welded-on bolts and protect the knuckle
- Described by the manufacturer as hard to find
- Dana Spicer part number 37759-2
Knuckle stud fitment basics
A spindle stud carries load between the knuckle and the wheel hub, so it has to be seated correctly and tightened to the right value for its size. Threads that are stripped, bent or corroded should be replaced rather than cleaned up, since a weak stud can fail under braking or a sharp turn.
Welded-on bolts are a common shortcut, but heat from welding can change the metal near the knuckle and cause cracking over time. A purpose-made stud avoids that work. Inspect the knuckle around the stud for cracks, check the threads on the mating nut, and replace worn hardware as a set when the knuckle is open. Keep the stud, nut and washer together during installation so the correct hardware is used.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 37759-2 |
| UPC | 23913139414 |
| Part type | Spindle stud |
Vehicle fitment
Spindle studs are sized to particular knuckles, so this stud is not a universal part despite the Universal Fit marking. Check your axle and knuckle, and confirm your vehicle’s year, model and trim before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Nuts and other hardware are not included with this stud.









