Overview
The Omix-ADA 16529.01 is a front spindle for the D25/27 axle. It is a direct OE replacement Jeep part built to original specifications.
The D25/27 designation names an axle, so the axle type is the main fit check. The part carries a limited five year manufacturers warranty.
Key features
- Direct OE replacement design, built to the original specifications
- Limited five year manufacturers warranty
Front spindle service
The spindle carries the hub and wheel bearing and connects them to the steering knuckle, so it takes steering and braking loads through the front of the vehicle. Wear in the spindle or its bearing shows up as wheel wobble, grinding from the hub or uneven tire wear. Because the spindle is central to wheel position, a worn part should be replaced rather than shimmed.
When the spindle is off, check the mounting surfaces for cracks, rust and wear, and look at the bearing seat for scoring. Clean and lubricate the bearing as the service manual calls for it, and replace the seals so water and grit stay out of the hub assembly. Tighten all fasteners to the proper settings during reassembly.
- Inspect the mounting surfaces for cracks and rust
- Check the bearing seat for scoring
- Replace seals to keep water and grit out
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16529.01 |
| UPC | 804314039592 |
| Axle application | D25/27 front axle |
| Warranty | Limited five year manufacturers warranty |
Vehicle fitment
No vehicle years or models are named. The universal label and the Jeep parts description do not identify a specific vehicle, so compare the spindle against your front axle before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Match the spindle to your front axle’s year, model and trim before ordering. The package holds one spindle only.












